Web Access Research Portal

Researcher: Bose, N (Professor Neil Bose)

Fields of Research

Marine and Estuarine Ecology (incl. Marine Ichthyology)
Ocean Engineering
Naval Architecture
Special Vehicles
Ship and Platform Hydrodynamics
Marine Engineering
Oceanography
Control Systems, Robotics and Automation
Maritime Engineering
Optimisation
Ship and Platform Structures
Environmental Engineering Modelling
Adaptive Agents and Intelligent Robotics
Earth Sciences
Engineering
Behavioural Ecology
Marine Geoscience
Interdisciplinary Engineering
Signal Processing
Physical Oceanography
Physiology
Biological Oceanography
Higher Education
Education Policy
Microbiology
Chemical Oceanography
Fisheries Management
Environmental Engineering
Computational Fluid Dynamics
Industrial Electronics
Renewable Power and Energy Systems Engineering (excl. Solar Cells)
Transport Engineering
Climate Change Processes

Research Objectives

Marine Oceanic Processes (excl. climate related)
Expanding Knowledge in Engineering
Passenger Water Transport
Water Transport
Machinery and Equipment
Wave Energy
Coastal Sea Freight Transport
Oil and Gas Extraction
Soils
Natural Hazards in Marine Environments
Ecosystem Assessment and Management of Antarctic and Sub-Antarctic Environments
Water Safety
Effects of Climate Change and Variability on Antarctic and Sub-Antarctic Environments (excl. Social Impacts)
Integrated Systems
Tidal Energy
International Sea Freight Transport (excl. Live Animal Transport)
Port Infrastructure and Management
Ecosystem Assessment and Management of Marine Environments
Agricultural Machinery and Equipment
Management of Solid Waste from Mineral Resource Activities
Aquaculture Prawns
Economic Issues in Tourism
Management of Liquid Waste from Mineral Resource Activities (excl. Water)
Energy
Precious (Noble) Metal Ore Exploration
Antarctic and Sub-Antarctic Oceanography
Wind Energy
Wild Caught Prawns
Expanding Knowledge in the Mathematical Sciences
National Security
Organic Industrial Chemicals (excl. Resins, Rubber and Plastics)
Expanding Knowledge in Technology
Environmentally Sustainable Mineral Resource Activities
Mineral Exploration
Social Impacts of Climate Change and Variability
Nautical Equipment (excl. Yachts)
Physical and Chemical Conditions of Water in Marine Environments
Environmentally Sustainable Construction
Resourcing of Education and Training Systems
Education and Training Systems Policies and Development
Energy Conservation and Efficiency
Management of Liquid Waste from Energy Activities (excl. Water)
Ecosystem Assessment and Management of Coastal and Estuarine Environments
Marine Flora, Fauna and Biodiversity
Emerging Defence Technologies
Coastal and Estuarine Water Management
Energy Conservation and Efficiency in Transport
Energy Storage (excl. Hydrogen)
Organised Sports
Climate Change Models
Physical and Chemical Conditions of Water in Coastal and Estuarine Environments
Navy
Agricultural Chemicals
Environmentally Sustainable Transport

Career Best Publications

Research Publications

A three dimensional wake impingement model and applications on tandem oscillating foils; Ocean Engineering
Human health risk assessment of naturally occurring radioactive materials in produced water - a case study; Human and Ecological Risk Assessment
130m Wave piercer catamaran: A new energy efficient multihull operating at critical speeds; Second International Conference on High Speed Marine Vehicles
A critical pressure based panel method for prediction of unsteady loading of marine propellers under cavitation; CFD2002
A practical design approach including resistance predictions for medium-speed catamarans; Ship Technology Research
A sensitivity study of ship powering prediction using Monte Carlo simulation, First International Conference on Marine Hydrodynamics; International Conference in Marine Hydrodynamics
A versatile particle image velocimetry system for flow measurements in water tanks; 7th Canadian Marine Hydromechanics and Structures Conference
Acute Ecological Risk Assosiated with Deposition: A Perisan Gulf Case Study; Ocean Engineering
Acute Ecological Risk Assosiated with Soot Deposition: a Persian Gulf Case Study; Ocean Engineering
An acoustic signal propagation experiment beneath sea ice; Ocean Engineering
An Advanced Measurement System for Vortex-Induced-Vibrations Characterization in Large-Scale Risers; OCEANS 2007 MTS/IEEE
An application of paddlewheel propulsion to a high speed craft; Second International Symposium on Marine Propulsors (SMP'11)
An ecological risk assessment methodology for screening discharge alternatives of produced water; Human and Ecological Risk Assessment
An experiment on modal parameters of a flexible model riser; Fourth Conference on Bluff Body Wakes and Vortex Induced Vibration
An experimental study on an azimuthing model podded propulsor in ice; Journal of Marine science and Technology
An implementation of Grigson's friction line; SHOT 2002
An investigation on wake/strut interaction of a tractor type podded propulsor; 7th Canadian Marine Hydromechanics and Structures Conference
An Overview of Model Tests and Numerical Predictions for Propeller-Ice Interaction; Canadian Marine Hydrodynamica and Structures Conference
An underwater vehicle maneuvering simulation: focus on turning maneuvers; Journal of Ocean Technology
Application of RANSE-based simulations for resistance prediction of medium-speed catamarans at different scales; 18th Australasian Fluid Mechanics Conference
Applications of Autonomous Underwater Vehicles in Offshore Petroleum Industry Environmental Effects Monitoring; Canadian International Petroleum Conference
Applications of Autonomous Underwater Vehicles in Offshore Petroleum Industry Environmental Effects Monitoring; Journal of Canadian Petroleum Technology
Aquaculture net drag force and added mass; Aquacultural Engineering
Assessing boat generated waves within sheltered waterways; Coasts & Ports 2013
Assessing ecological risks of produced water discharge in waves; Advances in Sustainable Petroleum Engineering and Science
Assessing ecological risks of produced water discharge in waves; New Developments in Sustainable Petroleum Engineering
Automated marine propeller geometry generation of arbitrary configurations and a wake model for far field momentum prediction; International Shipbuilding Progress
Autonomous Underwater Vehicle Operations - Needs of New Users. ; Masterclass in AUV Technology for Polar Science
AUV control in the presence of control plane faults; Oceans 2002 MTS/IEEE conference
AUV controllability with fin faults; Royal Institution of Naval Architects. Transactions. Part A. International Journal of Maritime Engineering
Baseline configuration of the C-SCOUT autonomous underwater vehicle; CANCAM
C-SCOUT maneuverability - a study in sensitivity; Oceans
Canadians evaluate technologies to manage offshore drilling cuttings; Oil and Gas Journal
CFD analysis of a planing hull; SHOT 22
Chair Session 2 - Innovative Applications - The Australian Hydrographic Society and Society for Underwater Technology 3rd Joint Technical Seminar and Exhibition; The Australian Hydrographic Society and Society for Underwater Technology 3rd Joint Technical Seminar and Exhibition
Commissioning a stereoscopic particle image velocimeter system for application in a towing tank; American Towing Tank Conference
Concept of a mathematical model for prediction of major design parameters of a submersible dredger/miner; 3rd Indian National Conference. on Harbour and Ocean Engineering
Conceptual design of a Submersible Remotely Operated Swimming Dredger (SROSD); 30th International Conference on Ocean, Offshore and Arctic Engineering (OMAE2011)
Decision Support System for Produced Water Management in the Offshore Petroleum Industry; Alantic Petroleum R&D Forum
Decision support system for risk management of produced water in offshore oil and gas industries; International Journal of Water
Depth changing manoeuvres using the MUN Explorer AUV; American Towing Tank Conference
Design and commissioning tests for waterjet self-propulsion testing of a medium-speed catamaran ferry using a single demihull; Third International Symposium on Marine Propulsors
Design and development of autonomous submersible dredger/miner; International Conference on Coastal and Ocean Technology
Design and dry land tests of a walking submersible dreger/miner; CEDA Dredging Days
Design and fabrication of a collective and cyclic pitch propeller; 23rd International Conference on Offshore Mechanics and Arctic Engineering
Design of a Model Pod Test Unit; 1st International Conference on Technological Advances in Pod Propulsion, T-POD
Detailed analysis of the wake of a DP thruster emphasizing comparison between LDV and SPIV techniques; Journal of Offshore Mechanics and Arctic Engineering
Development and use of a computer controlled sailing simulation; SimTecT
Discussions on locomotion and excavation systems of 'SROSD II'; 2015 IEEE Underwater Technology
Distributed embedded modular architecture (DEMA) for autonomous underwater vehicle (AUV) control systems; Unmanned Untethered Submersible Technology
Distribution of arsenic and copper in sediment pore water: an ecological risk assessment case study for offshore drilling waste discharges; Risk Analysis
Distribution of heavy metals in sediment pore water: an ecological risk assessment case study for offshore drilling waste discharges; Environmental Modelling & Software
Drag characterisation of prawn-trawl bodies; Ocean Engineering
Dynamic Positioning Thruster Near Wake Hydrodynamic Characteristics at Near Bollard Pull; Journal of Ship Research
Effects of changes in hub geometry on the performance of podded propellers in cavitating and non-cavitating open water conditions; 7th Canadian Marine Hydromechanics and Structures Conference
Effects of Geometry on the Performance of Podded Propulsors; Transactions of the Society of Naval Architects and Marine Engineers
Effects of strain rate and temperature on the uniaxial compressive strength of EG/AD/S CD model ice; 16th International Conference on Port and Ocean Engineering under Arctic Conditions
Energy Audits on Australian Fishing Vessels; 3rd International Symposium on Marine Propulsors
Energy balance analysis for an oscillating water column wave energy converter; Ocean Engineering
Environmental disturbance characterised through spillage from underwater dredging/mining cutting; 34th International Geological Congress 2012
Environmental monitoring of fish plant effluent in coastal Newfoundland; IEEE Oceans - 05
Escort Tug at large Yaw Angle: Comparison of CFD Predictions with Experimental data; International Journal of Small Craft Technology
Evaluation of a Dynamic Positioning Thruster Wake using Laser Doppler Velocimetry; 23rd International Conference on Offshore Mechanics and Arctic Engineering
Evaluation of generic types of drilling fluids using a risk-based analytical hierarchy process (AHP); Environmental Management (New York)
Evaluation of offshore drilling cuttings management technologies using multicriteria decision making
Evaluation, design and optimization for strength and integrity of polar class propellers; Cold Regions Science and Technology
Experimental analysis of the near wake from a ducted thruster at true and near bollard pull conditions using stereo particle image velocimetry (PIV); Journal of Offshore Mechanics and Arctic Engineering
Experimental Analysis of the Wake from a Dynamic Positioning Thruster; 25th ONR Symposium on Naval Hydrodynamics
Experimental and hydrodynamic evaluation of a dynamic positioning thruster wake induced load effects; Symposium on Naval Hydrodynamics
Experimental characterization of collective and cyclic pitch propulsion for underwater vehicle; 3rd International Symposium on Marine Propulsors
Experimental evaluation of a dynamic positioning thruster near and far wake momentum effects; 7th Canadian Marine Hydromechanics and Structures Conference
Experimental evaluation of a dynamic positioning thruster prohibited operating zone using SPIV; OMAE 2006
Experimental investigation of a highly skewed propeller in ice; Journal of Offshore Mechanics and Arctic Engineering
Experimental study of wave induced loads and motions on FLNG in head and oblique sea waves; International Conference on Ocean, Offshore and Arctic Engineering (OMAE2016)
Experiments with Podded Propulsors in Static Azimuthing Conditions; Canadian Marine Hydrodynamics and Structures Conference
Explorer class AUV operated by Memorial University, AUVs Future Technologies and Emerging Markets; The Australian Hydrographic Society and Society for Underwater Technology 3rd Joint Technical Seminar and Exhibition
Fate of drilling wastes in the marine environment; Petrotech
Flow Vectors Around an Escort Tug at a Large Yaw Angle; Canadian Marine Hydrodynamics and Structures Conference
Full-scale resistance prediction in finite waters: A study using computational fluid dynamics simulations, model test experiments and sea trial measurements; Journal of Engineering for the Maritime Environment
Full-scale simulation-based hull form design for large medium-speed catamarans with high fuel efficiency; 13th International Conference on Fast Sea Transportation
Fuzzy rule based modeling for human health risk from naturally occurring radioactive materials in produced water; Journal of Environmental Radioactivity
Harmonic wave and steady current effects on plane fish nets; OMAE: International Conference on Offshore Mechanics and Arctic Engineering
Harmonic wave force modification due to a steady current applied to plane fish nets; 5th Asia Pacific Workshop on Marine Hydrodynamics
High Mode Vortex Induced Vibration(VIV) Experiments on a Large-Scale Riser; OCEANS 2007 MTS/IEEE
High porosity net drag at a low angle of attack in application to a representative prawn trawl; 31st International Conference on Ocean, Offshore and Arctic Engineering (OMAE31)
Hydrodynamic characteristics of a lunate shaped oscillating propulsor; Ocean Engineering
Hydrodynamic Characteristics of a Marine Propeller in a Screw-Nozzle-Rudder Assmebly; Computational Fluid Dynamics Journal of Japan
Hydrodynamic characteristics of puller podded propulsors with tapered hub propellers; SNAME Props/Shafting 2006
Hydrodynamic hull form design space exploration of large medium-speed catamarans using full-scale CFD; International Journal of Maritime Engineering
Hydrodynamics study of podded propulsors with systematically varied geometry; T-POD 2006
Ice Capable Ships; Ship design and construction
Ice loads acting on a model podded propeller blade; Journal of Offshore Mechanics and Arctic Engineering
Ice loads on a model podded propeller blade in milling conditions; OMAE 2005
Ideas on how to write a conclusion of an engineering thesis or paper; eBookIT
Insurance for autonomous underwater vehicles; Underwater Technology
Maneuvering of the C-SCOUT AUV; 26th American Towing Tank Conference
Manoeuvring Experiments Using the MUN Explorer AUV; Symposium on Underwater Technology 2007
Manoeuvring Trials with the MUN Explorer AUV:Data Analysis and Observations; OCEANS 2007 MTS/IEEE
Marine Powering Prediction and Propulsors; Society of Naval Architects and Marine Engineers
Marine water quality assessment of synthetic-based drilling waste discharges; International Journal of Environmental Studies
Maximising efficiency and minimising cost in high speed craft; 11th International Conference on Fast Sea Transportation (FAST 2011)
Maximising fuel efficiency by utilising full-scale CFD for the initial ship design process - Validation and application for large catamarans; Pacific International Maritime Conference 2015
Measurement Techniques for Full Scale Test of a Submersible Walking dredger/Miner; American Towing Tank Conference
Measurements of Flow Around an Escort Tug Model with a Yaw Angle; Marine Technology
MERLIN - A decade of large AUV experience at Memorial University of Newfoundland; 2016 IEEE/OES Autonomous Underwater Vehicles (AUV 2016)
Model testing and performance comparison of plastic and metal tidal turbine rotors; Applied Ocean Research
Model testing of a series of bi-directional tidal turbine rotors; Energy
Modeling of an autonomous underwater vehicle; CANCAM
Modeling of the dispersion of drilling muds using the bblt model: the effects of settling velocity; Environmental Modelling and Assesment
Modeling, simulation and control of a cyclic and collective pitch propeller for underwater vehicles; The 1st Vietnam Conference on Control and Automation
Modelling acoustic propagation beneath Antarctic sea ice using measured environmental parameters; Deep-Sea Research. Part 2: Topical Studies in Oceanography
Modelling acoustic transmission loss due to sea ice cover; Acoustics Australia
Modelling sound propagation under ice using the Ocean Acoustics Library's Acoustic Toolbox; Acoustics 2012 Fremantle: Acoustics, Development and the Environment
Multi-component blade load measurements on a propeller in ice; Transactions of the Society of Naval Architects and Marine Engineers
Multi-modal vortex induced vibration tests on a flexible model riser; International Symposium on Technology of Ultra Deep Ocean Engineering
MUN Explorer AUV - Autonomous underwater vehicle, First International Conference on Marine Hydrodynamics; International Conference in Marine Hydrodynamics
Netting drag due to mesh orientation in prawn trawls; Computational Methods in Marine Engineering V: Marine 2013
Noise characterisation of the Aurora Australis while stationary in Antarctic sea ice; Ocean Engineering
Novel CFD-based full-scale resistance prediction for large medium-speed catamarans; Ocean Engineering
Numerical investigation of propulsive characteristics of podded propellers; 1st Intl. Conf. on Technological Advances in Pod Propulsion, T-POD
Numerical Investigation of the Influence of Span-wise Force Variation in Circular Cylinders Undergoing Vortex Induced Vibrations at High Reynolds Number; OCEANS 2007 MTS/IEEE
Numerical prediction of model podded propeller ice interaction loads; OMAE 2006
Numerical Prediction of Propeller Performance During Propeller-Ice Interaction; Marine Technology
Numerical simulation of waterjet propulsion system validated by wind tunnel tests; Royal Institution of Naval Architects. Transactions. Part B. International Journal of Small Craft Technology
Numerical simulations of a propeller wake impacting on a strut; Computational Fluid Dynamics Journal
Numerical simulations of propeller wake impacting on a strut; CFD2005
Numerical study of hub geometry on the performance of podded propellers; Computational Fluid Dynamics Journal
Numerical study of hub taper angle on podded propeller performance; Marine Technology and SNAME News
Numerical study of hub taper angle on podded propeller performance; CFD2005
Ocean outfall mapping using an AutonomousUnderwater Vehicle; OCEANS 2007 MTS/IEEE
Omnidirectional Control of an Underwater Vehicle Equipped with a Collective and Cyclic Pitch Propeller; The Second Vietnam Conference on Control and Automation
On the design and resistance prediction of large medium-speed catamarans; 8th International Conference on High-Performance Marine Vehicles
On the macro hydrodynamic design of highly efficient medium-speed catamarans with minimum resistance; International Journal of Maritime Engineering
Parametric analysis of horizontal axis tidal turbine hydrodynamics for optimum energy generation; 3rd International Symposium on Marine Propulsors
Performance of a family of surface piercing propellers; Royal Institution of Naval Architects. Transactions. Part A. International Journal of Maritime Engineering
Performance study of podded propulsor in static azimuthing conditions; International Shipbuilding Progress
Periodic gait plans for locomotion on natural terrain by a submersible walking dredger/miner; OCEANS 2007 MTS/IEEE
Phase averaged flow analysis in an oscillating water column wave energy converter; Journal of Offshore Mechanics and Arctic Engineering
Phase averaged flow analysis in an oscillating water column wave energy converter; 30th International Conference on Ocean, Offshore and Arctic Engineering (OMAE2011)
Phase averaging of the velocity fields in an oscillating water column using splines; Proceedings of the Institution of Mechanical Engineers, Part M: Journal of Engineering for the Maritime Environment
Planing hull model tests for CFD validation; 6th Canadian Marine Hydromechanics and Structures Conference
Planing hull performance evaluation with a general purpose CFD code; 24th Symposium on Naval Hydrodynamics
Planing hull performance from model tests; International Shipbuilding Progress
Powering for medium speed wave-piercing catamarans comparing waterjet and screw propeller performance using model testing; The fourth international symposium on marine propulsors
Predicting the effects of boat generated waves within sheltered waterways; 4th International Conference on Estuaries and Coasts
Preliminary blade load measurements on a model propeller in ice; 20th International Conference on Offshore Mechanics and Arctic Engr. Conference, ASME, OMAE01
Preparatory Tests with an Explorer class Autonomous Underwater Vehicle for Missions under Sea Ice; International Journal of Ocean and Climatic Systems
Prioritising Environmental Effects Monitoring (EEM) Programs: A Risk-Based Strategy; Environmental Effects Monitoring Workshop
Proceedings for The Third International Symposium on Marine Propulsors; The Third International Symposium on Marine Propulsors
Propulsive performance of the autonomous underwater vehicle C-SCOUT; Unmanned Untethered Submersible Technology
Prototyping a series of bi-directional horizontal axis tidal turbines for optimum energy conversion; Applied Energy
RANS prediction of FLNG-LNG hydrodynamic interactions in steady current; Applied Ocean Research
Rapid assessment of boat-generated waves within sheltered waterways; Australian Journal of Civil Engineering
Re-analysis of the “Akron” Airship Pressure Data to Design Pressure Measurement Experiments on an Underwater Vehicle; OCEANS 2007 MTS/IEEE
Reliability and Accuracy of Ship Powering Performance Extrapolation; Symposium on Marine Propulsion (SMP)
Reliability assessment of ship powering performance extrapolations using Monte Carlo methods; 3rd International Symposium on Marine Propulsors
Resistance prediction of medium-speed catamarans using free-surface viscous flow simulations; 15th Numerical Towing Tank Symposium
Risk management of drilling waste discharges in the marine environment - a holistic approach; Oceanic Engineering International (Canada)
Risk-based decision-making for drilling waste discharges using a fuzzy synthetic evaluation technique; Ocean Engineering
Sailing in Newfoundland and to the Azores
Scale effects on hydrodynamic manoeuvring force prediction; The 25th International Offshore and Polar Engineering Conference
Seakeeping correlation studies; 8th International Conference on Stability of Ships
Sensitivity of AUV added mass coefficients to variations in hull and control plane geometry; Ocean Engineering
Sensitivity of AUV response to variations in hydrodynamic parameters; Ocean Engineering
Ship powering prediction from isolated load-varying test data; 6th Canadian Marine Hydromechanics and Structures Conference
Ship powering prediction from self-propulsion load varying tests; SP2001, Lavrentiev Lectures
Simulating the Self-propulsion Test of FTV Bluefin using Potential Theory CFD; The 9th international conference on marine technology
Simulation of surface pressure induced by vortex/body interaction; Journal of Ship Mechanics
Sizing a Hybrid Power System for Battle Harbour Island in Labrador; Wind Engineering
Some analysis of propeller ice milling experiments; 6th Canadian Marine Hydromechanics and Structures Conference
Systematic geometric variation of podded propulsor models; 1st Intl. Conf. on Technological Advances in Pod Propulsion, T-POD
The 'W' prawn-trawl with emphasised drag-force transfer to its centre line to reduce overall system drag; PLoS One
The effect of mesh orientation on netting drag and its application to innovative prawn trawl design; Fisheries Research: An International Journal on Fishing Technology, Fisheries Science and Fisheries Management
The influence of hub taper angle on podded propeller performance: propeller only tests versus podded propeller unit tests; 7th Canadian Marine Hydromechanics and Structures Conference
The memorial explorer: Developing the role of AUVs in under-ice research; IEEE Oceans
The Memorial Explorer: Developing the role of AUVs in under-ice research; Oceans 2010
The modern sea trials capability for evaluating overall ship performance; Canadian Institute for Marine Engineering 23rd Annual Conference
The PROMISE Model for Evaluation of Mixing Produced Water in the Marine Environment; IASTED International Conference on Modelling and Simulation
The Role of adaptive mission planning and control in persistent autonomous underwater vehicles presence; 2012 IEEE/OES Autonomous Underwater Vehicles (AUV)
Three dimensional simulation of vortex induced vibration (VIV) in long cylinders using the numerical wind tunnel; 7th Canadian Marine Hydromechanics and Structures Conference
Toxaphene distribution in the Lake Superior trout and associated sublethal ecological risk: a probabilistic approach; Environmental Modelling & Software
Transport properties of offshore discharged synthetic based drilling cuttings; Oceans 2003
Turbidity Caused by Spillage from a Dredging/ Mining Transverse Axis Cutter; WODCON XX: The Art of Dredging
Uncertainty analysis of the ITTC 1978 powering extrapolation method; 7th Canadian Marine Hydromechanics and Structures Conference
Undersea gliders; Journal of Ocean technology
Underwater Geometry optimization for an oscillating water column ocean wave energy converter; 18th Australasian Fluid Mechanics Conference
URANS prediction of ship hydrodynamics in head sea waves at zero forward speed with model testing validation; International Conference on Ocean, Offshore and Arctic Engineering (OMAE2016)
URANS predictions of wave induced loads and motions on ships in regular head and oblique waves at zero forward speed; Journal of Fluids and Structures
URANS study of scale effects on hydrodynamic manoeuvring coefficients of KVLCC2; Ocean Engineering
Use of an autonomous underwater vehicle for environmental effects monitoring; Unmanned Untethered Submersible Technology
Use of an Explorer Class Autonomous Underwater Vehicle for Missions Under Sea Ice; 3rd International Conference on Ocean Engineering, ICOE 2009
Use of Broyden's iteration for a numerical unsteady Kutta condition; International Shipbuilding Progress
Use of factorial design in a podded propulsor geometric series; 7th Canadian Marine Hydromechanics and Structures Conference
Vortex Modes and Vortex-Induced Vibration of a Long, Flexible Riser; Ocean Engineering: An International Journal of Research and Development
Wake fields behind risers undergoing vortex - induced vibration; OMAE: International Conference on Offshore Mechanics and Arctic Engineering
Wake impingement experiments with a tractor type podded propeller; T-POD 2006
Waterjet system wind tunnel test; The International Conference on Waterjet Propulsion 4
Wave energy an example of collaboration between industry and academia in Australia; Journal of Ocean Technology
Wave wake: focus on vessel operations within sheltered waterways; 2012 SNAME Annual Meeting & Expo and Ship Production Symposium
Wave wake: focus on vessel operations within sheltered waterways; Journal of Ship Production and Design
Wave-piercing catamaran transom stern ventilation process; Ship Technology Research

Research Projects

Enhancing the Fidelity of Low-cost Human-in-the-loop Physical Sailboat Simulators; Australian Research Council (ARC)
Establish performance indicators for maritime education and training; International Association of Maritime Universities (IAMU)
Investigation of physical and biological processes in the Antarctic sea ice zone spring using in-situ, aircraft and underwater observations; Department of Environment, Water, Heritage and the Arts (DEWHA)
Optimising a novel prawn trawl design for minimum drag and maximum eco-efficiency; Fisheries Research & Development Corporation (FRDC)
Performance and design optimisation of Oscillating Water Column ocean wave energy converters; Australian Research Council (ARC)
Powering optimisation of large energy-efficient multihulls operating at critical speeds; Australian Research Council (ARC)
The ship within a ship: new-generation transhipment of bulk ore products; Australian Research Council (ARC)
Seabed Pipeline Hydrodynamic Modelling

Research Candidate Supervision

Assessment of Sea States from Onboard Measurements of Vessel Accelerations
Benthic Habitat Mapping by Autonomous Underwater Vehicles
CFD Investigations of Wave Energy Converter Performance
Collision Avoidance and Safety Critical Fault Response for Under Ice Autonomous Underwater Vehicle (AUV) Operations
Improving Sink-rate of Demersal Longlines- Focus on Reduction of Seabird Bycatch
Investigation into Global Performance Optimization of a Floating Liquefied Natural Gas System
Investigation of Physical factors Associated with High Speed Paddle Populsion
Marine Vessel Wave Wake- Focus on Vessel Operations within Sheltered Waterways
Modelling Acoustic Propagation Under-ice in Support of AUV Missions in Antarctica
Motions and Wave Loads of of Large High SPeed Catamarans
Numerical Investigations on the Resistance of Large Highly Efficient High - and Medium - Speed Catamarans
Optimisation of Oscillating water Column Devices Using Particle Image Velocimetry (PVI) Methods
Performance and Control of a Collective and Cyclic Pitch Propeller for an Underwater Vehicle
Performance of an Auger Dredging Cutter for Subsea Dredging and Mining
Phase-averaged Analysis of an Oscillating Water Column Wave Energy Converter
Prawn Trawl Shape due to Flexural Rigidity and Hydrodynamic Forces
Self-Propulsion Test of Propeller Driven Medium Speed Catamaran
Self-propulsion Tests of Catamaran Ferry
The Use of Hot-Films to Characterise Flow Regimes on a Sailing Yacht Hull - Guidance for Scaling
Validation of a Sailing Simulator using Full Scale Experimental Data