Web Access Research Portal

Research Report 2007 - NC Maritime Engineering and Hydrodynamics

Journal Article
Andrewartha, T* and Thomas, GA and Turner, T* and Lin, F*, “Replenishment at Sea: Motionsof Ships Operating Side by Side in Head Seas”, International Journal of Maritime Engineering, 149 (A 2007) pp. 63-72. doi:10.3940/rina.ijme.2007.a2.10807 ISSN 1479-8751 (2007) [Refereed Article] [Detail]
Azarsina, Farhood* and Bose, N and Seif, MS*, “An underwater vehicle maneuvering simulation: focus on turning maneuvers”, Journal of Ocean Technology, 2 (1) pp. 54-73. ISSN 1718-3200 (2007) [Refereed Article] [Full Text] [Detail]
Brandner, PA and Walker, GJ, “An experimental investigation into the performance of a flushwater-jet inlet”, Journal of Ship Research, 51 (1) pp. 1-21. ISSN 0022-4502 (2007) [Refereed Article] [Full Text] [Detail]
Chin, CKH and May, R*, “A model of an aircraft towing a cable-body system”, ANZIAM Journal, 45 pp. C615-C632. ISSN 1446-1811 (2007) [Refereed Article] [Detail]
Doctors, L* and MacFarlane, GJ and Young, R, “A study of transom-stern ventilation”, International Shipbuilding Progress , 54 (2) pp. 145-163. ISSN 0020-868X (2007) [Refereed Article] [Detail]
Goldsworthy, LC and Tajima, H*, “Modelling and Measurement of High Pressure Sprays, Ignition and Combustion of Heavy Fuel oil and Marine Diesel Oil”, Journal of the Japan Institution of Marine Engineering, 42 (1) pp. 54-62. ISSN 1346-1427 (2007) [Refereed Article] [Detail]
Griffiths, Gwyn* and Jones, C* and Ferguson, James* and Bose, N, “Undersea gliders”, Journal of Ocean technology, 2 (2) pp. 65-75. ISSN 1718-3200 (2007) [Refereed Article] [Full Text] [Detail]
Griffiths, Gwyn* and Bose, N and Ferguson, James* and Blidberg, Dick*, “Insurance for autonomous underwater vehicles”, Underwater Technology, 27 (2) pp. 43-48. doi:10.3723/175605407782724870 ISSN 1756-0543 (2007) [Refereed Article] [Full Text] [Detail]
Heales, DS* and Gregor, R* and Wakeford, J and Wang, Y* and Yarrow, J* and Milton, DA*, “Tropical prawn trawl bycatch of fish and seasnakes reduced by Yarrow Fisheye bycatch reduction device”, Fisheries Research, 89 (1) pp. 76-83. doi:10.1016/j.fishres.2007.09.002 ISSN 0165-7836 (2008) [Refereed Article] [Full Text] [Detail]
Hebblewhite, K and Sahoo, P and Doctors, L*, “A case study: theoretical and experimental analysis of motion characteristics of a trimaran hull form”, Ships and Offshore Structures, 2 (2) pp. 149-156. doi:10.1080/17445300701430242 ISSN 1744-5302 (2007) [Refereed Article] [Full Text] [Detail]
Iqbal, MTariq* and Bose, N, “Sizing a Hybrid Power System for Battle Harbour Island in Labrador”, Wind Engineering, 31 (4) pp. 233-245. doi:10.1260/030952407783123097 ISSN 0309-524X (2007) [Refereed Article] [Full Text] [Detail]
Lavroff, J and Davis, MR and Holloway, DS and Thomas, GA, “Experimental analysis of the wet flexural mode response of an NPL 6A hydroelastic segmented model”, Australian Journal of Mechanical Engineering, 4 (2) pp. 197-207. doi:10.1080/14484846.2007.11464526 ISSN 1448-4846 (2007) [Refereed Article] [Full Text] [Detail]
Lilienthal, T and Matsuda, A* and Thomas, GA, “Dynamic Stability in following Seas: predictive and experimental approaches”, Journal of Marine Science andTechnology, 12 (2 2007) pp. 111-118. doi:10.1007/s00773-006-0226-5 ISSN 0948-4280 (2007) [Refereed Article] [Detail]
MacFarlane, GJ and Cox, G*, “An introduction to the development of rational criteria for assesing vessel wash within sheltered waterways”, Journal of Marine Design and Operations, 2007 (B11) pp. 3-13. ISSN 1476-1556 (2007) [Refereed Article] [Detail]
Ojeda, RE and Prusty, G* and Lawrence, N and Thomas, GA, “A new approach for the large deflection finite element analysis of isotropic and composite plates with arbitrary orientated stiffeners”, Finite Elements in Analysis and Design, 43 (13) pp. 989-1002. doi:10.1016/j.finel.2007.06.007 ISSN 0168-874X (2007) [Refereed Article] [Detail]
Renilson, MR and Modral, O* and Taylor, J*, “An Investigation into the benefits of reconfigurable hull forms”, International Shipbuilding Progress, 54 (2) pp. 97-110. ISSN 0020-868X (2007) [Refereed Article] [Detail]
Renilson, MR, “A Note on Some Important Marine Environmental Issues”, Journal of Ocean Technology, 2 (No 3 2007) pp. 68-79. ISSN 1718-3200 (2007) [Refereed Article] [Detail]
Renilson, MR, “Predicting the Hydrodynamic Performmance of Very High Speed Craft: A Note on some of the problems”, International Journal of Small Craft, 149 (B1 2007) pp. 13-22. doi:10.3940/rina.ijsct.2007.b1.6407 ISSN 1740-0694 (2007) [Refereed Article] [Detail]
Thomas, GA and Duffy, JT and MacFarlane, GJ and Polmear, J, “Water Stilling for Towing Tank seakeeping experiments”, Australian Journal of Mechanical Engineering, 4 (2) pp. 225-234. doi:10.1080/14484846.2007.11464528 ISSN 1448-4846 (2007) [Refereed Article] [Detail]
Wang, J* and Akinturk, A* and Jones, S* and Bose, N and Kim, M* and Chun, H*, “Ice loads acting on a model podded propeller blade”, Journal of Offshore Mechanics and Arctic Engineering, 129 (3) pp. 236-244. doi:10.1115/1.2426993 ISSN 0892-7219 (2007) [Refereed Article] [Detail]
Chapter in Book
Bose, N and Hayes, Dan* and Griffiths, Gwyn*, “Autonomous Underwater Vehicle Operations - Needs of New Users. ”, Masterclass in AUV Technology for Polar Science, Society for Underwater Technology, Society for Underwater Technology (ed), London, pp. 69-79. ISBN 0-906940-48-6 (2007) [Research Book Chapter] [Full Text] [Detail]
Conference Publication
Barton, A and Brandner, PA and Sargison, J and Walker, GJ, “A force balance to measure the total drag of biofilms on test plates”, Proceedings of the 16th Australasian Fluid Mechanics Conference, 2-7 December 2007, Gold Coast, Australia, pp. 819-824. ISBN 978-1-864998-94-8 (2007) [Refereed Conference Paper] [Full Text] [Detail]
Brandner, PA and Walker, GJ and Niekamp, P and Anderson, B*, “An Investigation of Cloud Cavitation about a Sphere”, Proceedings of the 16th Australasian Fluid Mechanics Conference, 2-7 December 2007, Crown Plaza, Gold Coast, Australia, pp. 1392-1398. ISBN 978-1-864998-94-8 (2007) [Refereed Conference Paper] [Full Text] [Detail]
Brandner, PA and Lecoffre, Y* and Walker, GJ, “Design Considerations in the Development of a Modern Cavitation Tunnel”, Proceedings of the 16th Australasian Fluid Mechanics Conference, 2-7 December 2007, Crown Plaza, Gold Coast, Australia, pp. 630-637. ISBN 978-1-864998-94-8 (2007) [Refereed Conference Paper] [Full Text] [Detail]
Clarke, DB* and Brandner, PA and Walker, GJ, “Computational and Experimental Investigation of Flow Around a 3-1 Prolate Spheroid”, Proceedings of the 16th Australasian Fluid Mechanics Conference, 2-7 December 2007, Crowne Plaza, Gold Coast, Australia, pp. 1381-1387. ISBN 978-1-864998-94-8 (2007) [Refereed Conference Paper] [Full Text] [Detail]
Davis, MR and Whelan, JR* and Thomas, GA, “Computational modelling of wet deck slam loads with reference to sea trials”, Proceedings of FAST2007, 23-27 Sept, 2007, Shanghai China, pp. 616-624. (2007) [Refereed Conference Paper] [Detail]
Goldsworthy, LC and Tajima, H*, “A Model for Ignition and Combustion Quality of Heavy Fuel Oil”, Proceedings of the 25th CIMAC World Congress on Combustion Engine, 21-24 May 2007, Vienna EJ (2007) [Refereed Conference Paper] [Detail]
Ireland, J* and MacFarlane, GJ and Drobyshevski, Y*, “Investigation into the Sensitivity of the Dynamic Hook Load During Subsea Deployment of A Suction Can”, Proceedings of the OMAE2007 26th International Conference on Offshore Mechanics and Arctic Engineering , 10-15 June 2007, San-Diego, USA, pp. 1-11. (2007) [Refereed Conference Paper] [Detail]
Lavroff, J and Davis, MR and Holloway, DS and Thomas, GA, “The whipping vibratory response of a hydroelastic segmented catamaran model”, Proceedings of FAST2007: Ninth International Conference on Fast Sea Transportation, 23-27 Sept, 2007, Shanghai China, pp. 600-607. (2007) [Refereed Conference Paper] [Detail]
Ojeda, RE and Lawrence, N and Thomas, GA and Prusty, BG*, “Geometrically non-linear analysis of composite stiffened & sandwhich structures using the finite element method”, Progress in Mechanics and Structures of material, 29 November to 1st December 2006, Christchurch, New Zealand, pp. 204-208. ISBN 0415426928 (2007) [Refereed Conference Paper] [Detail]
Pearce, BW and Brandner, PA, “Limitations on 2D Super-cavitating Hydrofoil Performance”, Proceedings of the 16th Australasian Fluid Mechanics Conference, 2-7 December 2007, Crown Plaza, Gold Coast, Australia, pp. 1399-1404. ISBN 978-1-864998-94-8 (2007) [Refereed Conference Paper] [Full Text] [Detail]
Sprent, T and MacFarlane, GJ, “The Alignment of the Australian Maritime College's Towing Tank”, Proceedings of the Spatial Science Institute Biennial International Conference (SSC2007), Hobart, Tasmania Australia, 14-18 May 2007, May, Hobart, Tasmania, pp. 63-76. ISBN 978-0-9581366-6-2 (2007) [Refereed Conference Paper] [Detail]
Thomas, GA and Doctors, l* and Couser, P* and Hackett, MJ, “Catamaron Motions in Beam Obilique Seas”, Proceeding of the 9th International Conference on Fast Sea Transportation, FAST 07, 26-29 September 2007, Shanghai, pp. 426-434. (2007) [Refereed Conference Paper] [Detail]
Thomas, GA and Davis, MR and Whelan, J*, “Computational Modelling of Wet Deck Slam Loads with Refeence to Seat Trials”, Proceeding of the 9th International Conference on Fast Sea Transportation, FAST 07, 26-29 September 2007, Shanghai, pp. 616 -625. (2007) [Refereed Conference Paper] [Detail]
Thomas, GA and Mason, AP, “Stochastic Optimisation of IACC Yatchs”, Proceeding 6th International COMPIT, 23-25 April 2007, Cortona, pp. 122-142. ISBN 88-7617-002-2 (2007) [Refereed Conference Paper] [Detail]
Thomas, GA and MacFarlane, GJ and Dand, I* and Robbins, A and Renilson, MR, “The Decay of Catamaran wave wake in Shallow water”, Proceeding of the 9th International Conference on Fast Sea Transportation, FAST 07, 26-29 September 2007, Shanghai, pp. 184-192. (2007) [Refereed Conference Paper] [Detail]

* This author is not affiliated with the University of Tasmania.