Web Access Research Portal
Research Report 2016 - Engineering
Journal Article |
---|
Adair, D* and Jaeger, M, “Simulation of tapered rotating beams with centrifugal stiffening using the Adomian decomposition method”, Applied Mathematical Modelling, 40 (4) pp. 3230-3241. doi:10.1016/j.apm.2015.09.097 ISSN 0307-904X (2016) [Refereed Article] |
Adair, D and Jaeger, M, “Incorporating critical thinking into an engineering undergraduate learning environment”, International Journal of Higher Education, 5 (2) pp. 23-39. doi:10.5430/ijhe.v5n2p23 ISSN 1927-6044 (2016) [Refereed Article] |
Ahmad, M* and Amin, MB and Hussain, S* and Kang, BH and Cheong, T* and Lee, S*, “Health Fog: a novel framework for health and wellness applications”, Journal of Supercomputing, 72 (10) pp. 3677-3695. doi:10.1007/s11227-016-1634-x ISSN 0920-8542 (2016) [Refereed Article] |
Alahmer, A and Aladayleh, W*, “Effect two grades of octane numbers on the performance, exhaust and acoustic emissions of spark ignition engine”, Fuel, 180 pp. 80-89. doi:10.1016/j.fuel.2016.04.025 ISSN 0016-2361 (2016) [Refereed Article] |
Alahmer, A and Wang, X and Al-Rbaihat, R* and Amanul Alam, KC* and Saha, BB*, “Performance evaluation of a solar adsorption chiller under different climatic conditions”, Applied Energy, 175 pp. 293-304. doi:10.1016/j.apenergy.2016.05.041 ISSN 0306-2619 (2016) [Refereed Article] |
AlaviMehr, J and Davis, MR and Lavroff, J and Holloway, DS and Thomas, GA*, “Response of a high-speed wave-piercing catamaran to an active ride control system”, Royal Institution of Naval Architects. Transactions. Part A. International Journal of Maritime Engineering, 158 (Part A4) pp. A325-A335. doi:10.3940/rina.ijme.2016.a4.382 ISSN 1479-8751 (2016) [Refereed Article] |
Ali, R* and Afzal, M* and Hussain, M* and Ali, M* and Siddiqi, MH* and Lee, S* and Kang, BH, “Multimodal hybrid reasoning methodology for personalized wellbeing services”, Computers in Biology and Medicine, 69 pp. 10-28. doi:10.1016/j.compbiomed.2015.11.013 ISSN 0010-4825 (2016) [Refereed Article] |
Amuno, S* and Niyogi, S* and Amuno, M and Attitaq, J*, “Heavy metal bioaccumulation and histopathological alterations in wild Arctic hares (Lepus arcticus) inhabiting a former lead-zinc mine in the Canadian high Arctic: A preliminary study”, Science of the Total Environment, 556 pp. 252-263. doi:10.1016/j.scitotenv.2016.03.007 ISSN 0048-9697 (2016) [Refereed Article] |
An, HM and Liu, HY and Han, H and Zheng, X and Wang, XG*, “Hybrid finite-discrete element modelling of dynamic fracture and resultant fragment casting and muck-piling by rock blast”, Computers and Geotechnics, 81 pp. 322-345. doi:10.1016/j.compgeo.2016.09.007 ISSN 0266-352X (2017) [Refereed Article] |
Anees, A and Aryal, J and O'Reilly, MM and Gale, TJ and Wardlaw, T, “A robust multi-kernel change detection framework for detecting leaf beetle defoliation using Landsat 7 ETM+ data”, ISPRS Journal of Photogrammetry and Remote Sensing, 122 pp. 167-178. doi:10.1016/j.isprsjprs.2016.10.011 ISSN 0924-2716 (2016) [Refereed Article] |
Banos, O* and Amin, MB and Khan, WA* and Afzal, M* and Hussain, M* and Kang, BH and Lee, S*, “The Mining Minds digital health and wellness framework”, BioMedical Engineering Online, 15 (Suppl 1) Article S76. doi:10.1186/s12938-016-0179-9 ISSN 1475-925X (2016) [Refereed Article] |
Bell, J and Lavroff, J and Davis, MR, “Loading response of stern tab motion controls in shallow water”, Royal Institution of Naval Architects. Transactions. Part A. International Journal of Maritime Engineering, 158 (Part A2) pp. 113-119. doi:10.3940/rina.2016.a2.352 ISSN 1479-8751 (2016) [Refereed Article] |
Brinkmann, B and Negnevitsky, M, “A probabilistic approach to observability of distribution networks”, IEEE Transactions on Power Systems, 32 (2) pp. 1169-1178. doi:10.1109/TPWRS.2016.2583479 ISSN 0885-8950 (2017) [Refereed Article] |
Bryson, H* and Sultrop, HP* and Buchanan, G* and Hann, C* and Snowdon, M* and Rao, A* and Slee, A* and Fanning, K* and Wright, D* and McVicar, J and Clark, B* and Harris, G* and Chen, XQ*, “Vertical wind tunnel for prediction of rocket flight dynamics”, Aerospace, 3 (2) Article 10. doi:10.3390/aerospace3020010 ISSN 2226-4310 (2016) [Refereed Article] |
Chen, X* and Chan, AHC and Yang, J*, “Simulating the breakage of glass under hard body impact using the combined finite-discrete element method”, Computers and Structures, 177 pp. 56-68. doi:10.1016/j.compstruc.2016.08.010 ISSN 0045-7949 (2016) [Refereed Article] |
Cheng, C* and Chen, C* and Ma, T* and Liu, H and Tang, C*, “A case study on the strata movement mechanism and surface deformation regulation in Chengchao underground iron mine”, Rock Mechanics and Rock Engineering, 50 (4) pp. 1011-1032. doi:10.1007/s00603-016-1132-8 ISSN 0723-2632 (2017) [Refereed Article] |
Dargaville, PA and Sadeghi Fathabadi, O and Plottier, GK and Lim, K* and Wheeler, KI* and Jayakar, R and Gale, TJ, “Development and preclinical testing of an adaptive algorithm for automated control of inspired oxygen in the preterm infant”, Archives of Disease in Childhood. Fetal and Neonatal Edition, 102 (1) pp. F31-F36. doi:10.1136/archdischild-2016-310650 ISSN 1359-2998 (2017) [Refereed Article] |
Ghanbari Ghazijahani, T and Jiao, H and Holloway, D, “Composite timber beams strengthened by steel and CFRP”, Journal of Composites for Construction, 21 (1) Article 0000714. doi:10.1061/(ASCE)CC.1943-5614.0000714 ISSN 1090-0268 (2017) [Refereed Article] |
Ghanbari Ghazijahani, T and Lavroff, J, “The art of scientific research publications in engineering”, Publishing Research Quarterly, 32 (1) pp. 9-21. doi:10.1007/s12109-015-9438-z ISSN 1053-8801 (2016) [Refereed Article] |
Ghanbari Ghazijahani, T and Showkati, H* and Jiao, H, “Buckling assessment of dented truncated cones under external pressure”, Advances in Computational Design, 1 (4) pp. 345-356. doi:10.12989/acd.2016.1.4.345 ISSN 2383-8477 (2016) [Refereed Article] |
Giosio, DR and Henderson, AD and Walker, JM and Brandner, PA, “Physics-based hydraulic turbine model for system dynamic studies”, IEEE Transactions on Power Systems, 99 (2) pp. 1-8. doi:10.1109/TPWRS.2016.2574330 ISSN 0885-8950 (2016) [Refereed Article] |
Guo, L* and Liu, Y* and Jiao, H and An, S*, “Behavior of thin-walled circular hollow section stub columns under axial compression”, International Journal of Steel Structures, 16 (3) pp. 777-787. doi:10.1007/s13296-015-0159-0 ISSN 1598-2351 (2016) [Refereed Article] |
Hamilton, J and Negnevitsky, M and Wang, X, “Thermal analysis of a single-storey livestock barn”, Advances in Mechanical Engineering, 8 (4) pp. 1-9. doi:10.1177/1687814016643456 ISSN 1687-8132 (2016) [Refereed Article] |
Han, SC and Liang, Y and Chung, H and Kim, H* and Kang, BH, “Chinese trending search terms popularity rank prediction”, Information Technology and Management, 17 (2) pp. 133-139. doi:10.1007/s10799-015-0238-0 ISSN 1385-951X (2016) [Refereed Article] |
Hu, B* and Cao, F* and Yang, X* and Wang, X and Xing, Z*, “Theoretical and experimental study on conveying behavior of a twin-screw multiphase pump”, Proceedings of the Institution of Mechanical Engineers Part E: Journal of Process Mechanical Engineering, 230 (4) pp. 304-315. doi:10.1177/0954408914549789 ISSN 0954-4089 (2016) [Refereed Article] |
Huynh-The, T* and Banos, O* and Lee, S* and Kang, BH and Kim, ES* and Le-Tien, T*, “NIC: a robust background extraction algorithm for foreground detection in dynamic scenes”, IEEE Transactions on Circuits and Systems for Video Technology, 27 (7) pp. 1478-1490. doi:10.1109/TCSVT.2016.2543118 ISSN 1051-8215 (2017) [Refereed Article] |
Jaeger, M and Adair, D, “Time pressure in scenario-based online construction safety quizzes and its effect on students’ performance”, European Journal of Engineering Education, 42 (3) pp. 241-251. doi:10.1080/03043797.2016.1153042 ISSN 0304-3797 (2017) [Refereed Article] |
Jaeger, M* and Adair, D, “Perception of TQM benefits, practices and obstacles: the case of project managers and quality management representatives in Kuwait”, The TQM Journal, 28 (2) pp. 317-336. doi:10.1108/TQM-10-2014-0091 ISSN 1754-2731 (2016) [Refereed Article] |
Jalilian, A* and Naderi, SB and Negnevitsky, M and Hagh, MT* and Muttaqi, KM*, “Controllable DC-link fault current limiter augmentation with DC chopper to improve fault ride-through of DFIG”, IET Renewable Power Generation, 11 (2) pp. 313-324. doi:10.1049/iet-rpg.2016.0146 ISSN 1752-1416 (2017) [Refereed Article] |
Jin, L* and Cao, F* and Yang, D* and Wang, X, “Performance investigations of an R404A air-source heat pump with an internal heat exchanger for residential heating in northern China”, International Journal of Refrigeration, 67 pp. 239-248. doi:10.1016/j.ijrefrig.2016.03.004 ISSN 0140-7007 (2016) [Refereed Article] |
Johnson, F* and White, CJ and van Dijk, A* and Ekstrom, M* and Evans, JP* and Jakob, D* and Kiem, AS* and Leonard, M* and Rouillard, A* and Westra, S*, “Natural hazards in Australia: floods”, Climatic Change, 139 (1) pp. 21-35. doi:10.1007/s10584-016-1689-y ISSN 0165-0009 (2016) [Refereed Article] |
Lin, P* and Zhu, X* and Li, Q* and Liu, H and Yu, Y*, “Study on optimal grouting timing for controlling uplift deformation of a super high arch dam”, Rock Mechanics and Rock Engineering, 49 (1) pp. 115-142. doi:10.1007/s00603-015-0732-z ISSN 0723-2632 (2016) [Refereed Article] |
Liu, HY and Han, H and An, HM and Shi, JJ*, “Hybrid finite-discrete element modelling of asperity degradation and gouge grinding during direct shearing of rough rock joints”, International Journal of Coal Science & Technology, 3 (3) pp. 295-310. doi:10.1007/s40789-016-0142-1 ISSN 2095-8293 (2016) [Refereed Article] |
Lock, A and Holloway, D, “Boundary element modelling of a novel simple enhanced bandwidth Schroeder diffuser offering comparable performance to a fractal design”, Acoustics Australia, 44 (1) pp. 137-147. doi:10.1007/s40857-016-0049-4 ISSN 0814-6039 (2016) [Refereed Article] |
Lyden, S and Haque, ME*, “A simulated annealing global maximum power point tracking approach for PV modules under partial shading conditions”, IEEE Transactions on Power Electronics, 31 (6) pp. 4171-4181. doi:10.1109/TPEL.2015.2468592 ISSN 0885-8993 (2016) [Refereed Article] |
Ma, T* and Wu, Q* and Tang, C* and Liu, HY, “Hydraulic fracturing propagation mechanism during shale gas reservoir stimulation through horizontal well”, Tehnicki Vjesnik, 23 (2) pp. 477-490. doi:10.17559/TV-20151216024823 ISSN 1330-3651 (2016) [Refereed Article] |
Mansouri, MM* and Nayeripour, M* and Negnevitsky, M, “Internal electrical protection of wind turbine with doubly fed induction generator”, Renewable and Sustainable Energy Reviews, 55 pp. 840-855. doi:10.1016/j.rser.2015.11.023 ISSN 1364-0321 (2016) [Refereed Article] |
McInnes, KL* and White, CJ and Haigh, ID* and Hemer, MA* and Hoeke, RK* and Holbrook, NJ and Kiem, AS* and Oliver, ECJ and Ranasinghe, R* and Walsh, KJE* and Westra, S* and Cox, R*, “Natural hazards in Australia: sea level and coastal extremes”, Climatic Change, 139 (1) pp. 69-83. doi:10.1007/s10584-016-1647-8 ISSN 0165-0009 (2016) [Refereed Article] |
Millar, B and Jiang, D, “Smart grid optimization through asynchronous, distributed primal dual iterations”, IEEE Transactions on Smart Grid, 8 (5) pp. 2324-2331. doi:10.1109/TSG.2016.2522970 ISSN 1949-3053 (2017) [Refereed Article] |
Muttaqi, KM* and Le, ADT and Negnevitsky, M and Ledwich, G*, “A novel tuning method for advanced line drop compensator and its application to response coordination of distributed generation with voltage regulating devices”, IEEE Transactions on Industry Applications, 52 (2) pp. 1842-1854. doi:10.1109/TIA.2015.2487441 ISSN 0093-9994 (2016) [Refereed Article] |
Muttaqi, KM* and Le, ADT and Aghaei, J* and Mahboubi-Moghaddarn, E* and Negnevitsky, M and Ledwich, G*, “Optimizing distributed generation parameters through economic feasibility assessment”, Applied Energy, 165 pp. 893-903. doi:10.1016/j.apenergy.2016.01.006 ISSN 0306-2619 (2016) [Refereed Article] |
Naderi, SB and Negnevitsky, M and Jalilian, A* and Hagh, MT*, “Efficient fault ride-through scheme for three phase voltage source inverter-interfaced distributed generation using DC link adjustable resistive type fault current limiter”, Renewable Energy, 92 pp. 484-498. doi:10.1016/j.renene.2016.02.016 ISSN 0960-1481 (2016) [Refereed Article] |
Negnevitsky, M and Nikolic, D* and de Groot, M*, “Adaptive neuro-fuzzy synchronization in isolated power systems with high wind penetration”, Journal of Advanced Computational Intelligence and Intelligent Informatics, 20 (3) pp. 418-428. doi:10.20965/jaciii.2016.p0418 ISSN 1343-0130 (2016) [Refereed Article] |
Perkins-Kirkpatrick, SE* and White, CJ and Alexander, LV* and Argueso, D* and Boschat, G* and Cowan, T* and Evans, JP* and Ekstrom, M* and Oliver, ECJ and Phatak, A* and Purich, A*, “Natural hazards in Australia: heatwaves”, Climatic Change, 139 (1) pp. 101-114. doi:10.1007/s10584-016-1650-0 ISSN 1573-1480 (2016) [Refereed Article] |
Plottier, GK and Wheeler, KI* and Ali, SKM* and Sadeghi Fathabadi, O and Jayakar, R and Gale, TJ and Dargaville, PA, “Clinical evaluation of a novel adaptive algorithm for automated control of oxygen therapy in preterm infants on non-invasive respiratory support”, Archives of Disease in Childhood. Fetal and Neonatal Edition, 102 (1) pp. F37-F43. doi:10.1136/archdischild-2016-310647 ISSN 1359-2998 (2017) [Refereed Article] |
Ravizza, M and Giosio, D and Henderson, A and Hovenden, M and Hudson, M and Salleh, S* and Sargison, J and Shaw, JL* and Walker, J and Hallegraeff, G, “Light as a key driver of freshwater biofouling surface roughness in an experimental hydrocanal pipe rig”, Biofouling, 32 (6) pp. 685-697. doi:10.1080/08927014.2016.1184255 ISSN 0892-7014 (2016) [Refereed Article] |
Sadeghi Fathabadi, O and Gale, TJ and Lim, KL and Salmon, BP and Dawson, JA* and Wheeler, KI* and Olivier, JC and Dargaville, PA, “Characterisation of the oxygenation response to inspired oxygen adjustments in preterm infants”, Neonatology, 109 (1) pp. 37-43. doi:10.1159/000440642 ISSN 1661-7800 (2016) [Refereed Article] |
Sadeghi Fathabadi, O and Gale, TJ and Olivier, JC and Dargaville, PA, “Automated control of inspired oxygen for preterm infants: What we have and what we need”, Biomedical Signal Processing and Control, 28 pp. 9-18. doi:10.1016/j.bspc.2016.03.002 ISSN 1746-8094 (2016) [Refereed Article] |
Saebi, J* and Nguyen, DT and Javidi, MH*, “Towards a fully integrated market for demand response, energy and reserves”, IET Generation, Transmission and Distribution, 10 (16) pp. 4130-4139. doi:10.1049/iet-gtd.2016.0567 ISSN 1751-8687 (2016) [Refereed Article] |
Saito, K* and Kimura, M* and Ohara, K* and Motoda, H, “Super mediator - A new centrality measure of node importance for information diffusion over social network”, Information Sciences, 329 pp. 985-1000. doi:10.1016/j.ins.2015.03.034 ISSN 0020-0255 (2016) [Refereed Article] |
Seddegh, S and Wang, X and Henderson, AD, “A comparative study of thermal behaviour of a horizontal and vertical shell-and-tube energy storage using phase change materials”, Applied Thermal Engineering, 93 pp. 348-358. doi:10.1016/j.applthermaleng.2015.09.107 ISSN 1359-4311 (2016) [Refereed Article] |
Shen, J* and Xing, Z* and Zhang, K* and He, Z* and Wang, X, “Development of a water-injected twin-screw compressor for mechanical vapor compression desalination systems”, Applied Thermal Engineering, 95 pp. 125-135. doi:10.1016/j.applthermaleng.2015.11.057 ISSN 1359-4311 (2016) [Refereed Article] |
Susanto, F and de Souza Jr, P, “Mössbauer spectral curve fitting combining fundamentally different techniques”, Nuclear Instruments and Methods in Physics Research, Section B: Beam Interactions with Materials and Atoms, 385 pp. 40-45. doi:10.1016/j.nimb.2016.08.011 ISSN 0168-583X (2016) [Refereed Article] |
Tang, SB* and Zhang, H* and Tang, CA* and Liu, HY, “Numerical model for the cracking behavior of heterogeneous brittle solids subjected to thermal shock”, International Journal of Solids and Structures, 80 pp. 520-531. doi:10.1016/j.ijsolstr.2015.10.012 ISSN 0020-7683 (2016) [Refereed Article] |
Tavakoli, A and Negnevitsky, M and Muttaqi, KM*, “A decentralized model predictive control for operation of multiple distributed generators in an islanded mode”, IEEE Transactions on Industry Applications, 53 (2) pp. 1466-1475. doi:10.1109/TIA.2016.2616396 ISSN 0093-9994 (2017) [Refereed Article] |
Tavakoli, A and Negnevitsky, M and Nguyen, DT* and Muttaqi, KM*, “Energy exchange between electric vehicle load and wind generating utilities”, IEEE Transactions on Power Systems, 31 (2) pp. 1248-1258. doi:10.1109/TPWRS.2015.2418335 ISSN 0885-8950 (2016) [Contribution to Refereed Journal] |
Walsh, K* and White, CJ and McInnes, K* and Holmes, J* and Schuster, S* and Richter, H* and Evans, JP* and Di Luca, A* and Warren, RA*, “Natural hazards in Australia: storms, wind and hail”, Climatic Change, 139 (1) pp. 55-67. doi:10.1007/s10584-016-1737-7 ISSN 0165-0009 (2016) [Refereed Article] |
Wang, M* and Feng, YT* and Pande, GN* and Chan, AHC and Zuo, WX*, “Numerical modelling of fluid-induced soil erosion in granular filters using a coupled bonded particle lattice Boltzmann method”, Computers and Geotechnics, 82 pp. 134-143. doi:10.1016/j.compgeo.2016.10.006 ISSN 0266-352X (2017) [Refereed Article] |
Ward, L and Lyden, S and Fitzallen, N and Leon de la Barra, B, “Using engineering activities to engage middle school students in physics and biology”, Australasian Journal of Engineering Education, 20 (2) pp. 145-156. doi:10.1080/22054952.2015.1130092 ISSN 1325-4340 (2016) [Refereed Article] |
Ward, L and Lyden, S and Fitzallen, N, “'Egg-streme' egg crashes”, Australian Mathematics Teacher, 72 (2) pp. 10-15. ISSN 1839-4779 (2016) [Professional, Refereed Article] |
Wessels, KJ* and van den Bergh, F* and Roy, DP* and Salmon, BP and Steenkamp, KC* and MacAlister, B* and Swanepoel, D* and Jewitt, D*, “Rapid land cover map updates using change detection and robust random forest classifiers”, Remote Sensing, 8 (11) Article 888. doi:10.3390/rs8110888 ISSN 2072-4292 (2016) [Refereed Article] |
Westra, S* and White, CJ and Kiem, AS*, “Introduction to the special issue: historical and projected climatic changes to Australian natural hazards”, Climatic Change pp. 1-19. doi:10.1007/s10584-016-1826-7 ISSN 0165-0009 (2016) [Non Refereed Article] |
Wu, X* and Xing, Z* and He, Z* and Wang, X and Chen, W*, “Performance evaluation of a capacity-regulated high temperature heat pump for waste heat recovery in dyeing industry”, Applied Thermal Engineering, 93 pp. 1193-1201. doi:10.1016/j.applthermaleng.2015.10.075 ISSN 1359-4311 (2016) [Refereed Article] |
Yang, D* and Song, Y* and Cao, F* and Jin, L* and Wang, X, “Theoretical and experimental investigation of a combined R134a and transcritical CO2 heat pump for space heating”, International Journal of Refrigeration, 72 pp. 156-170. doi:10.1016/j.ijrefrig.2016.07.016 ISSN 0140-7007 (2016) [Refereed Article] |
Yin, X* and Cao, F* and Jin, L* and Hu, B* and Shu, P* and Wang, X, “Numerical and experimental investigations of electronic evaporative cooling performance with a coiled channel”, Applied Thermal Engineering, 94 pp. 256-265. doi:10.1016/j.applthermaleng.2015.10.127 ISSN 1359-4311 (2016) [Refereed Article] |
* This author is not affiliated with the University of Tasmania.