Web Access Research Portal
Research Report 2017 - Engineering
Journal Article |
---|
Abkenar, AT* and Nazari, A* and Jayasinghe Arachchillage, SDG and Kapoor, A* and Negnevitsky, M, “Fuel cell power management using genetic expression programming in all-electric ships”, IEEE Transactions on Energy Conversion, 32 (2) pp. 779-787. doi:10.1109/TEC.2017.2693275 ISSN 0885-8969 (2017) [Refereed Article] |
Adair, D and Jaeger, M, “Aggregating student peer assessment during capstone projects”, International Journal of Engineering Education, 33 (1) pp. 216-224. ISSN 0949-149X (2017) [Refereed Article] |
Adair, D and Jaeger, M, “A power series solution for rotating nonuniform Euler-Bernoulli cantilever beams”, Journal of Vibration and Control, 24 (17) pp. 3855-3864. doi:10.1177/1077546317714183 ISSN 1077-5463 (2017) [Refereed Article] |
AlaviMehr, J and Lavroff, J and Davis, MR and Holloway, DS and Thomas, GA, “An experimental investigation of ride control algorithms for high-speed catamarans Part 1: Reduction of ship motions”, Journal of Ship Research, 61 (1) pp. 35-49. doi:10.5957/JOSR.61.1.160041 ISSN 0022-4502 (2017) [Refereed Article] |
AlaviMehr, J and Lavroff, J and Davis, MR and Holloway, DS and Thomas, GA*, “An experimental investigation of ride control algorithms for high-speed catamarans Part 2: Mitigation of wave impact loads”, Journal of Ship Research, 61 (2) pp. 1-13. doi:10.5957/JOSR.61.2.160046 ISSN 1542-0604 (2017) [Refereed Article] |
Ali, M and Bilal, HSM* and Razzaq, MA* and Khan, J* and Lee, S* and Idris, M* and Aazam, M* and Choi, T* and Han, SC and Kang, BH, “IoTFLiP: IoT-based flipped learning platform for medical education”, Digital Communications and Networks, 3 (3) pp. 188-194. doi:10.1016/j.dcan.2017.03.002 ISSN 2352-8648 (2017) [Refereed Article] |
Alsalah, A and Holloway, D and Ghanbari Ghazijahani, T, “Recovery of capacity lost due to openings in cylindrical shells under compression”, Journal of Constructional Steel Research, 137 pp. 169-179. doi:10.1016/j.jcsr.2017.06.006 ISSN 0143-974X (2017) [Refereed Article] |
Amraei, M* and Jiao, H and Zhao, X-L* and Tong, L-W*, “Fatigue testing of butt-welded high strength square hollow sections strengthened with CFRP”, Thin-Walled Structures, 120 pp. 260-268. doi:10.1016/j.tws.2017.09.004 ISSN 0263-8231 (2017) [Refereed Article] |
An, H* and Liu, H and Wang, X* and Shi, J* and Han, H, “Hybrid finite-discrete element modelling of blast-induced excavation damaged zone in the top-heading of deep tunnels”, Stavebni Obzor - The Civil Engineering Journal, 2017 Article 3. doi:10.14311/CEJ.2017.01.0003 ISSN 1805-2576 (2017) [Refereed Article] |
Bai, Q and Kang, BH, Preface, 9992 pp. V-VI. doi:10.1007/978-3-319-50127-7 ISSN 0302-9743 (2017) [Edited Journal] |
Boersma, M and Wrobel-Tobiszewska, A and Murphy, L and Eyles, A, “Impact of biochar application on the productivity of a temperate vegetable cropping system”, New Zealand Journal of Crop and Horticultural Science, 45 (4) pp. 277-288. doi:10.1080/01140671.2017.1329745 ISSN 0114-0671 (2017) [Refereed Article] |
Castro-Orgaz, O* and Montes, JS, “Minimum specific energy in open-channel flows: the Salas–Dominguez contribution”, Journal of Hydraulic Research, 53 (2) pp. 151-160. doi:10.1080/00221686.2014.991356 ISSN 0022-1686 (2015) [Refereed Article] |
Cecil, F and Zhang, M and Guijt, RM and Henderson, A and Nesterenko, PN and Paull, B and Breadmore, MC and Macka, M, “3D printed LED based on-capillary detector housing with integrated slit”, Analytica Chimica Acta, 965 pp. 131-136. doi:10.1016/j.aca.2017.02.020 ISSN 0003-2670 (2017) [Refereed Article] |
Chen, K* and Zou, D* and Kong, X* and Chan, A and Hu, Z*, “A novel nonlinear solution for the polygon scaled boundary finite element method and its application to geotechnical structures”, Computers and Geotechnics, 82 pp. 201-210. doi:10.1016/j.compgeo.2016.09.013 ISSN 0266-352X (2017) [Refereed Article] |
Cheng, G* and Ma, T* and Tang, C* and Liu, H and Wang, S*, “A zoning model for coal mining - induced strata movement based on microseismic monitoring”, International Journal of Rock Mechanics and Mining Sciences, 94 pp. 123-138. doi:10.1016/j.ijrmms.2017.03.001 ISSN 1365-1609 (2017) [Refereed Article] |
Cong, B* and Wang, Z* and Chan, AHC and Yang, Q*, “Analytical model for vertically loaded anchor performance with a bridle shank”, Computers and Geotechnics, 82 pp. 85-98. doi:10.1016/j.compgeo.2016.09.012 ISSN 0266-352X (2017) [Refereed Article] |
Davis, MR and French, BJ and Thomas, GA, “Wave slam on wave piercing catamarans in random head seas”, Ocean Engineering, 135 pp. 84-97. doi:10.1016/j.oceaneng.2017.03.007 ISSN 0029-8018 (2017) [Refereed Article] |
Derikvand, M and Nolan, G and Jiao, H and Kotlarewski, N, “What to do with structurally low-grade wood from Australia's plantation Eucalyptus; building application?”, BioResources, 12 (1) pp. 4-7. ISSN 1930-2126 (2017) [Letter or Note in Journal] |
Esmaiel, H and Jiang, D, “Spectrum and energy efficient OFDM multicarrier modulation for an underwater acoustic channel”, Wireless Personal Communications, 96 (1) pp. 1577-1593. doi:10.1007/s11277-017-4257-5 ISSN 0929-6212 (2017) [Refereed Article] |
Ghanbari Ghazijahani, T and Jiao, H and Holloway, D, “Concrete-filled circular steel tubes with a timber infill under axial compression”, Journal of Structural Engineering, 143 (7) pp. 1-9. doi:10.1061/(ASCE)ST.1943-541X.0001757 ISSN 0733-9445 (2017) [Refereed Article] |
Giosio, DR and Henderson, AD and Walker, JM and Brandner, PA, “Rapid reserve generation from a Francis Turbine for system frequency control”, Energies, 10 (4) Article 496. doi:10.3390/en10040496 ISSN 1996-1073 (2017) [Refereed Article] |
Hamilton, J and Negnevitsky, M and Wang, X, “The potential of low load diesel application in increasing renewable energy source penetration”, Cigre Science and Engineering, 8 pp. 49-59. ISSN 1286-1146 (2017) [Refereed Article] |
Hay, SG* and Smith, SL* and Timms, GP and Archer, JW*, “Three-shaped-reflector beam-scanning pillbox antenna suitable for mm wavelengths”, IEEE Transactions on Antennas and Propagation, 59 (7) pp. 2495-2501. doi:10.1109/TAP.2011.2152335 ISSN 0018-926X (2011) [Refereed Article] |
Jaeger, M* and Yu, G* and Adair, D, “Organisational culture of Chinese construction organisations in Kuwait”, Engineering Construction and Architectural Management, 24 (6) pp. 1051-1066. doi:10.1108/ECAM-07-2016-0157 ISSN 0969-9988 (2017) [Refereed Article] |
Joybari, MM* and Haghighat, F* and Seddegh, S, “Natural convection characterization during melting of phase change materials: development of a simplified front tracking method”, Solar Energy, 158 pp. 711-720. doi:10.1016/j.solener.2017.10.031 ISSN 0038-092X (2017) [Refereed Article] |
Joybari, MM* and Haghighat, F* and Seddegh, S and Al-Abidi, AA*, “Heat transfer enhancement of phase change materials by fins under simultaneous charging and discharging”, Energy Conversion and Management, 152 pp. 136-156. doi:10.1016/j.enconman.2017.09.018 ISSN 0196-8904 (2017) [Refereed Article] |
Joybari, MM* and Haghighat, F* and Seddegh, S, “Numerical investigation of a triplex tube heat exchanger with phase change material: simultaneous charging and discharging”, Energy and Buildings, 139 pp. 426-438. doi:10.1016/j.enbuild.2017.01.034 ISSN 0378-7788 (2017) [Refereed Article] |
Kalali, H* and Ghanbari Ghazijahani, T and Hajsadeghi, M* and Zirakian, T* and Alaee, FJ*, “Numerical Study on Steel Shear Walls with Sinusoidal Corrugated Plates”, Latin American Journal of Solids and Structures, 13 (15) pp. 2802-2814. doi:10.1590/1679-78252837 ISSN 1679-7817 (2016) [Professional, Non Refereed Article] |
Kaur, M and Marshall, AP and Eastwood-Sutherland, C and Salmon, BP and Dargaville, PA and Gale, TJ, “Automatic torso detection in images of preterm infants”, Journal of Medical Systems, 41 (9) Article 134. doi:10.1007/s10916-017-0782-8 ISSN 0148-5598 (2017) [Refereed Article] |
Kleynhans, W* and Salmon, BP and Wessels, KJ*, “A novel framework for parameter selection of the autocorrelation change detection method using 250m MODIS time-series data in the Gauteng Province of South Africa”, South African Journal of Geomatics, 6 (3) pp. 407-415. doi:10.4314/sajg.v6i3.10 ISSN 2225-8531 (2017) [Refereed Article] |
Lavroff, J and Davis, MR and Holloway, DS and Thomas, GA* and McVicar, JJ, “Wave impact loads on wave-piercing catamarans”, Ocean Engineering, 131 pp. 263-271. doi:10.1016/j.oceaneng.2016.11.015 ISSN 0029-8018 (2017) [Refereed Article] |
Liu, X* and Tang, C* and Li, L* and Lv, P* and Liu, H, “Microseismic monitoring and 3D finite element analysis of the Right Bank Slope, Dagangshan hydropower station, during reservoir impounding”, Rock Mechanics and Rock Engineering, 50 (7) pp. 1901-1917. doi:10.1007/s00603-017-1191-5 ISSN 0723-2632 (2017) [Refereed Article] |
Luo, T* and Ooi, ET* and Chan, AHC and Fu, SJ*, “The combined scaled boundary finite-discrete element method: grain breakage modelling in cohesion-less granular media”, Computers and Geotechnics, 88 pp. 199-221. doi:10.1016/j.compgeo.2017.03.012 ISSN 0266-352X (2017) [Refereed Article] |
Luo, T* and Ooi, ET* and Chan, AHC and Shao-jun, F*, “A combined DEM-SBFEM for particle breakage modelling of rock-fill materials”, Rock and Soil Mechanics, 38 (5) pp. 1463-1471. doi:10.16285/j.rsm.2017.05.029 ISSN 1000-7598 (2017) [Refereed Article] |
Luo, T* and Ooi, ET* and Chan, AHC and Fu, S-J*, “A 2-D polygon discrete element method and program for simulating rockfill materials”, Yantu Lixue/Rock and Soil Mechanics, 38 (3) pp. 883-892. doi:10.16285/j.rsm.2017.03.034 ISSN 1000-7598 (2017) [Refereed Article] |
Mantegna, GA* and White, CJ and Remenyi, TA and Corney, SP and Fox-Hughes, P, “Simulating sub-daily Intensity-Frequency-Duration curves in Australia using a dynamical high-resolution regional climate model”, Journal of Hydrology, 554 pp. 277-291. doi:10.1016/j.jhydrol.2017.09.025 ISSN 0022-1694 (2017) [Refereed Article] |
Mukhambetiyar, A* and Jaeger, M and Adair, D*, “CFD modelling of flow characteristics in micro shock tubes”, Journal of Applied Fluid Mechanics, 10 (4) pp. 1061-1070. doi:10.18869/acadpub.jafm.73.241.27474 ISSN 1735-3572 (2017) [Refereed Article] |
Naderi, SB and Negnevitsky, M and Jalilian, A* and Hagh, MT* and Muttaqi, KM*, “Optimum resistive type fault current limiter: An efficient solution to achieve maximum fault ride-through capability of fixed-speed wind turbines during symmetrical and asymmetrical grid faults”, IEEE Transactions on Industry Applications, 53 (1) pp. 538-548. doi:10.1109/TIA.2016.2611665 ISSN 0093-9994 (2017) [Refereed Article] |
Naderi, SB and Negnevitsky, M and Jalilian, A* and Hagh, MT* and Muttaqi, KM*, “Low voltage ride-through enhancement of DFIG-based wind turbine using DC link switchable resistive type fault current limiter”, International Journal of Electrical Power and Energy Systems, 86 pp. 104-119. doi:10.1016/j.ijepes.2016.10.001 ISSN 0142-0615 (2017) [Refereed Article] |
Panton, L and Holloway, D and Cabrera, D* and Miranda, L*, “Stage acoustics in eight Australian concert halls: acoustic conditions in relation to subjective assessments by a touring chamber orchestra”, Acoustics Australia, 45 (1) pp. 25-39. doi:10.1007/s40857-016-0075-2 ISSN 0814-6039 (2017) [Refereed Article] |
Panton, LF and Holloway, DS and Cabrera, D*, “Effect of a chamber orchestra on direct sound and early reflections for performers on stage: a boundary element method study”, Acoustical Society of America. Journal, 141 (4) pp. 2461-2472. doi:10.1121/1.4979119 ISSN 0001-4966 (2017) [Refereed Article] |
Penesis, I and Katersky Barnes, R and Kilpatrick, S and Symes, M and Leon de la Barra, BA, “Reskilling the manufacturing workforce and developing capabilities for the future”, Australasian Journal of Engineering Education, 22 (1) pp. 14-22. doi:10.1080/22054952.2017.1338228 ISSN 1325-4340 (2017) [Refereed Article] |
Rajapakse, G and Jayasinghe, S and Fleming, A and Negnevitsky, M, “A model predictive control-based power converter system for oscillating water column wave energy converters”, Energies, 10 (10) Article 1631. doi:10.3390/en10101631 ISSN 1996-1073 (2017) [Refereed Article] |
Ramm, TD and Graham, S* and White, CJ and Watson, CS, “Advancing values-based approaches to climate change adaptation: a case study from Australia”, Environmental Science and Policy, 76 pp. 113-123. doi:10.1016/j.envsci.2017.06.014 ISSN 1462-9011 (2017) [Refereed Article] |
Ramm, TD and White, CJ and Chan, AHC and Watson, CS, “A review of methodologies applied in Australian practice to evaluate long-term coastal adaptation options”, Climate Risk Management, 17 pp. 35-51. doi:10.1016/j.crm.2017.06.005 ISSN 2212-0963 (2017) [Refereed Article] |
Sadeghi Fathabadi, O and Gale, T and Wheeler, K* and Plottier, G* and Owen, LS* and Olivier, JC and Dargaville, PA, “Hypoxic events and concomitant factors in preterm infants on non-invasive ventilation”, Journal of Clinical Monitoring and Computing, 31 (2) pp. 427-433. doi:10.1007/s10877-016-9847-3 ISSN 1387-1307 (2017) [Refereed Article] |
Salmon, BP and Holloway, DS and Kleynhans, W* and Olivier, JC and Wessels, KJ*, “Applying model parameters as a driving force to a deterministic nonlinear system to detect land cover change”, IEEE Transactions on Geoscience and Remote Sensing, 55 (12) pp. 7165-7176. doi:10.1109/TGRS.2017.2743218 ISSN 0196-2892 (2017) [Refereed Article] |
Schwegmann, CP* and Kleynhans, W* and Salmon, BP, “Synthetic aperture radar ship detection using Haar-like features”, IEEE Geoscience and Remote Sensing Letters, 14 (2) pp. 154-158. doi:10.1109/LGRS.2016.2631638 ISSN 1545-598X (2017) [Refereed Article] |
Seddegh, S and Wang, X and Joybari, MM* and Haghighat, F*, “Investigation of the effect of geometric and operating parameters on thermal behavior of vertical shell-and-tube latent heat energy storage systems”, Energy, 137 pp. 69-82. doi:10.1016/j.energy.2017.07.014 ISSN 0360-5442 (2017) [Refereed Article] |
Seddegh, S and Joybari, MM* and Wang, X and Haghighat, F*, “Experimental and numerical characterization of natural convection in a vertical shell-and-tube latent thermal energy storage system”, Sustainable Cities and Societies, 35 pp. 13-24. doi:10.1016/j.scs.2017.07.024 ISSN 2210-6707 (2017) [Refereed Article] |
Song, Y* and Wang, J* and Cao, F* and Shu, P* and Wang, X, “Investigation on the adaptivity of the transcritical CO2 refrigeration system with a capillary”, International Journal of Refrigeration, 79 pp. 183-195. doi:10.1016/j.ijrefrig.2017.04.013 ISSN 0140-7007 (2017) [Refereed Article] |
Song, Y* and Li, D* and Cao, F* and Wang, X, “Investigation of the optimal intermediate water temperature in a combined r134a and transcritical CO2 heat pump for space heating”, International Journal of Refrigeration, 79 pp. 10-24. doi:10.1016/j.ijrefrig.2017.04.018 ISSN 0140-7007 (2017) [Refereed Article] |
Song, Y* and Li, D* and Yang, D* and Jin, L* and Cao, F* and Wang, X, “Performance comparison between the combined R134a/CO2 heat pump and cascade R134a/CO2 heat pump for space heating”, International Journal of Refrigeration, 74 pp. 590-603. doi:10.1016/j.ijrefrig.2016.12.001 ISSN 0140-7007 (2017) [Refereed Article] |
Song, Y* and Li, D* and Cao, F* and Wang, X, “Theoretical investigation on the combined and cascade CO2/R134a heat pump systems for space heating”, Applied Thermal Engineering, 124 pp. 1457-1470. doi:10.1016/j.applthermaleng.2017.06.014 ISSN 1359-4311 (2017) [Refereed Article] |
Song, Y* and Wang, J* and Cao, F* and Shu, P* and Wang, X, “Experimental investigation on a capillary tube based transcritical CO2 heat pump system”, Applied Thermal Engineering, 112 pp. 184-189. doi:10.1016/j.applthermaleng.2016.10.033 ISSN 1359-4311 (2017) [Refereed Article] |
Tang, SB* and Bao, CY* and Liu, HY, “Brittle fracture of rock under combined tensile and compressive loading conditions”, Canadian Geotechnical Journal, 54 (1) pp. 88-101. doi:10.1139/cgj-2016-0214 ISSN 0008-3674 (2017) [Refereed Article] |
Tian, Y* and Shen, J* and Wang, C* and Xing, Z* and Wang, X, “Modeling and performance study of a water-injected twin-screw water vapor compressor”, International Journal of Refrigeration, 83 pp. 75-87. doi:10.1016/j.ijrefrig.2017.04.008 ISSN 0140-7007 (2017) [Refereed Article] |
Wang, Z* and Liu, P* and Chan, A and Jin, D*, “Principal stress rotation and cyclic shear strength for an elliptical rotation stress path”, Marine Georesources and Geotechnology, 35 (8) pp. 1077-1085. doi:10.1080/1064119X.2017.1290167 ISSN 1064-119X (2017) [Refereed Article] |
White, CJ and Carlsen, H* and Robertson, AW* and Klein, RJT* and Lazo, JK* and Kumar, A* and Vitart, F* and de Perez, EC* and Ray, AJ* and Murray, V* and Bharwani, S* and MacLeod, D* and James, R* and Fleming, L* and Morse, AP* and Eggen, B* and Graham, R* and Kjellstrom, E* and Becker, E* and Pegion, KV* and Holbrook, NJ and McEvoy, D* and Depledge, M* and Perkins-Kirkpatrick, S* and Brown, TJ* and Street, R* and Jones, L* and Remenyi, T and Hodgson-Johnston, I and Buontempo, C* and Lamb, R* and Meinke, H and Arheimer, B* and Zebiak, SE*, “Potential applications of subseasonal-to-seasonal (S2S) predictions”, Meteorological Applications, 24 (3) pp. 315-325. doi:10.1002/met.1654 ISSN 1350-4827 (2017) [Refereed Article] |
Wrobel-Tobiszewska, A and Boersma, M and Sargison, J* and Adams, P* and Singh, B* and Franks, S and Birch, CJ and Close, DC, “Nutrient changes in potting mix and Eucalyptus nitens leaf tissue under macadamia biochar amendments”, Journal of Forestry Research, 29 (2) pp. 383-393. doi:10.1007/s11676-017-0437-0 ISSN 1007-662X (2018) [Refereed Article] |
Wu, X* and Xing, Z* and He, Z* and Wang, X and Chen, W*, “Effects of lubricating oil on the performance of a semi-hermetic twin screw refrigeration compressor”, Applied Thermal Engineering, 112 pp. 340-351. doi:10.1016/j.applthermaleng.2016.10.038 ISSN 1359-4311 (2017) [Refereed Article] |
Wu, Y* and Liu, Q* and Chan, AHC and Liu, H, “Implementation of a time-domain random-walk method into a discrete element method to simulate nuclide transport in fractured rock masses”, Geofluids, 2017 Article 5940380. doi:10.1155/2017/5940380 ISSN 1468-8123 (2017) [Refereed Article] |
Xianjun, T and Chen, W* and Liu, H and Chan, AHC and Tian, H* and Meng, X* and Wang, F* and Deng, X*, “A combined supporting system based on foamed concrete and U-shaped steel for underground coal mine roadways undergoing large deformations”, Tunnelling and Underground Space Technology, 68 pp. 196-210. doi:10.1016/j.tust.2017.05.023 ISSN 0886-7798 (2017) [Refereed Article] |
Yang, T* and Liu, HY and Tang, CA*, “Scale effect in macroscopic permeability of jointed rock mass using a coupled stress-damage-flow method”, Engineering Geology, 228 pp. 121-136. doi:10.1016/j.enggeo.2017.07.009 ISSN 0013-7952 (2017) [Refereed Article] |
Ye, J* and Jeng, D-S* and Chan, AHC and Wang, R* and Zhu, QC*, “3D integrated numerical model for Fluid-Structures-Seabed Interaction (FSSI): loosely deposited seabed foundation”, Soil Dynamics and Earthquake Engineering, 92 pp. 239-252. doi:10.1016/j.soildyn.2016.10.026 ISSN 0267-7261 (2017) [Refereed Article] |
Yin, X* and Cao, F* and Pan, S* and Song, Y* and Fei, J* and Wang, X, “Numerical investigation on screw rotor deformation and influence on volumetric efficiency of the twin-screw multiphase pump”, Applied Thermal Engineering, 111 pp. 1111-1118. doi:10.1016/j.applthermaleng.2016.10.027 ISSN 1359-4311 (2017) [Refereed Article] |
Zuo, D* and Letchford, CW and Wayne, S*, “Wind tunnel study of wind loading on rectangular louvered panels”, Wind and Structures, 14 (5) pp. 449-463. doi:10.12989/was.2011.14.5.449 ISSN 1226-6116 (2011) [Refereed Article] |
* This author is not affiliated with the University of Tasmania.