Web Access Research Portal

Research Report 2007 - Engineering

Journal Article
Anderson, WC* and Basu, S* and Letchford, CW, “Comparison of dynamic subgrid-scale models for simulations of neutrally buoyant shear-driven atmospheric boundary layer flows”, Environmental Fluid Mechanics , 7 (3) pp. 195-215. doi:10.1007/s10652-007-9023-x ISSN 1567-7419 (2007) [Refereed Article] [Full Text] [Detail]
Brandner, PA and Walker, GJ, “An experimental investigation into the performance of a flushwater-jet inlet”, Journal of Ship Research, 51 (1) pp. 1-21. ISSN 0022-4502 (2007) [Refereed Article] [Full Text] [Detail]
Bunyawanichakul, P and Walker, GJ and Sargison, J and Doe, PE, “Modelling and simulation of Paddy Grain (Rice) drying in a simple pneumatic dryer”, Biosystems engineering, 96 (3) pp. 335-344. doi:10.1016/j.biosystemseng.2006.11.004 ISSN 1537-5110 (2007) [Refereed Article] [Full Text] [Detail]
Chen, L* and Letchford, CW, “Simulation of extreme winds from thunderstorm downbursts”, Journal of wind engineering & industrial aerodynamics, 95 (9-11) pp. 977-990. doi:10.1016/j.jweia.2007.01.021 ISSN 0167-6105 (2007) [Refereed Article] [Detail]
Davis, MR and Whelan, JR*, “Computation of wet deck bow slam loads for catamaran arched cross sections”, Ocean Engineering, 34 (17-18) pp. 2265-2276. doi:10.1016/j.oceaneng.2007.06.001 ISSN 0029-8018 (2007) [Refereed Article] [Detail]
Davis, MR and Holloway, DS, “A comparison of the motions of trimarans, catamarans and monohulls”, Australian Journal of Mechanical Engineering, 4 (2) pp. 183-195. doi:10.1080/14484846.2007.11464525 ISSN 1448-4846 (2007) [Refereed Article] [Detail]
Karri, V and Kiatcharoenpol, T, “A monitoring system of drill wear states using a hybrid neural network”, Australian Journal of Intelligent Information Processing Systems, 8 (4) pp. 200-205. ISSN 1321-2133 (2005) [Refereed Article] [Detail]
Kashem, MA and Ledwich, G*, “Energy Requirement for distributed energy resources with battery energy storage for voltage support in three-phase distribution lines”, Electrical Power Systems Research, 77 (1) pp. 10-23. doi:10.1016/j.epsr.2006.01.008 ISSN 0378-7796 (2007) [Refereed Article] [Full Text] [Detail]
Lavroff, J and Davis, MR and Holloway, DS and Thomas, GA, “Experimental analysis of the wet flexural mode response of an NPL 6A hydroelastic segmented model”, Australian Journal of Mechanical Engineering, 4 (2) pp. 197-207. doi:10.1080/14484846.2007.11464526 ISSN 1448-4846 (2007) [Refereed Article] [Full Text] [Detail]
Le, DTA and Muttaqi, KM and Negnevitsky, M and Ledwich, G*, “Minimising voltage deviation in distribution feeders by optimising size and location of distributed generation”, Australian Journal of Electrical & Electronics Engineering, 3 (2) pp. 147-155. doi:10.1080/1448837x.2007.11464155 ISSN 1448-837X (2007) [Refereed Article] [Full Text] [Detail]
Ning, L* and Holmes, JD* and Letchford, CW, “Trajectories of windborne debris and applications to impact testing”, Journal of Structural Engineering, 133 (2) pp. 274-282. doi:10.1061/(ASCE)0733-9445(2007)133:2(274) ISSN 0733-9445 (2007) [Refereed Article] [Full Text] [Detail]
Phan, PA and Gale, TJ, “Two-mode adaptive fuzzy control with approximation error estimator”, IEEE Transactions on Fuzzy Systems, 15 (5) pp. 943-955. doi:10.1109/TFUZZ.2006.890657 ISSN 1063-6706 (2007) [Refereed Article] [Full Text] [Detail]
Phan, PA and Gale, TJ, “Direct Adaptive fuzzy control with less restrictions on the control gain”, International Journal of Control, Automation, and Systems, 5 (6) pp. 621-629. ISSN 1740-7516 (2007) [Refereed Article] [Full Text] [Detail]
Potter, C and Negnevitsky, M, “Investigating using stochastic methods to generate training data for windpower prediction”, Australian Journal of Electrical & Electronics Engineering, 3 (2) pp. 137-145. doi:10.1080/1448837x.2007.11464154 ISSN 1448-837X (2007) [Refereed Article] [Full Text] [Detail]
Yap, WK and Karri, V, “Regenerative energy control system for plug-in hydrogen fuel cell scooter”, International Journal of Energy research, 32 (9) pp. 783-792. doi:10.1002/er.1389 ISSN 1099-114X (2008) [Refereed Article] [Detail]
Conference Publication
Aktarujjaman, M and Haque, ME and Muttaqi, KM and Negnevitsky, M and Ledwich, G*, “Control stabilisation of multiple distributed generation”, Proceedings of Australasian Universities Power Engineering Conference (AUPEC 2007), 9-12 Dec, 2007, Perth, Western Australia, pp. 636-640. ISBN 978-0-646-47499-1 (2007) [Refereed Conference Paper] [Full Text] [Detail]
Al-Abdeli, YM and Karri, V and Bullen, F and Nguyen, VTP and McCulloch, J and Avery, SR, “Learning platforms for renewable energy awareness: hydrogen powered vehicles”, Proceedings of Second International Conference on Engineering Education and Training, 9-11 April, 2007, Kuwait, pp. 1-9. (2007) [Non Refereed Conference Paper] [Detail]
Andrewartha, JM and Sargison, J and Perkins, KJ, “The effect of gomphonema and filamentous algae streamers on hydroelectric canal capacity and turbulent boundary layer structure”, Proceedings of the 16th Australasian Fluid Mechanics Conference, 2-7 December 2007, Gold Coast, Australia, pp. 241-246. ISBN 978-1-864998-94-8 (2007) [Refereed Conference Paper] [Full Text] [Detail]
Barton, A and Brandner, PA and Sargison, J and Walker, GJ, “A force balance to measure the total drag of biofilms on test plates”, Proceedings of the 16th Australasian Fluid Mechanics Conference, 2-7 December 2007, Gold Coast, Australia, pp. 819-824. ISBN 978-1-864998-94-8 (2007) [Refereed Conference Paper] [Full Text] [Detail]
Barton, A and Sargison, J and Walker, GJ, “Effects of freshwater biofilms on flow over rough surfaces”, Proceedings of 6th international symposium on Ecohydraulics, 18-23 Feb. 2007, Cristchurch, New Zealand, pp. 1-4. (2007) [Non Refereed Conference Paper] [Full Text] [Detail]
Choo, YC and Muttaqi, KM and Negnevitsky, M, “Modelling of hydraulic turbine for dynamic studies and performance analysis”, Proceedings of the Australasian Universities Power Engineering Conference (AUPEC 2007), 9-12 December 2007, Perth, Western Australia, pp. 681-686. ISBN 978-0-646-47499-1 (2007) [Refereed Conference Paper] [Detail]
Choo, YC and Muttaqi, KM and Negnevitsky, M, “Stability of hydraulic governor turbine system for isolated operation”, Proceedings of Australasian Universities Power Engineering Conference (AUPEC 2007), 9-12 Dec, 2007, Perth, Western Australia, pp. 630-635. ISBN 978-0-646-47499-1 (2007) [Refereed Conference Paper] [Detail]
Clarke, DB* and Brandner, PA and Walker, GJ, “Computational and Experimental Investigation of Flow Around a 3-1 Prolate Spheroid”, Proceedings of the 16th Australasian Fluid Mechanics Conference, 2-7 December 2007, Crowne Plaza, Gold Coast, Australia, pp. 1381-1387. ISBN 978-1-864998-94-8 (2007) [Refereed Conference Paper] [Full Text] [Detail]
Culberg, JL and Negnevitsky, M and Muttaqi, KM, “Fuzzy interference system controller for hydro turbine-generator system”, Proceedings of Australasian Universities Power Engineering Conference (AUPEC 2007), 9-12 Dec, 2007, Perth, Western Australia, pp. 700. ISBN 978-0-646-47499-1 (2007) [Refereed Conference Paper] [Detail]
Davis, MR and Whelan, JR* and Thomas, GA, “Computational modelling of wet deck slam loads with reference to sea trials”, Proceedings of FAST2007, 23-27 Sept, 2007, Shanghai China, pp. 616-624. (2007) [Refereed Conference Paper] [Detail]
Dayawansa, P* and Kuruppu, M* and Mashiri, F, “Strategies for dragline rope life extension”, Proceedings of 6th international symposium on mine planning and equipment selection and the 10th international symposium on environmental issues and waste management in energy and mineral production, 11-13 dec 2007, Bangkok, Thailand, pp. 234-246. ISBN 978-0-9784416-0-9 (2007) [Non Refereed Conference Paper] [Detail]
Haque, ME and Muttaqi, KM and Negnevitsky, M, “a control strategy for output maximization of a PMSG based speed wind turbine”, Proceedings of Australasian Universities Power Engineering Conference (AUPEC 2007), 9-12 Dec, 2007, Perth, Western Australia, pp. 770-775. ISBN 978-0-646-47499-1 (2007) [Refereed Conference Paper] [Detail]
Haque, ME and Rahman, MF*, “Control trajectories for interior permanent magnet synchronous motor derives”, Proceedings of 2007 IEEE International Electric Machines and Drives Conference, 3-5 May, 2007, Antalya, Turkey, pp. 306-311. ISBN 1-4244-0743-5 (2007) [Refereed Conference Paper] [Detail]
Haruni, AMO and Muttaqi, KM and Negnevitsky, M, “Analysis of harmonics and voltage fluctuation using different models of ARC furnace”, Proceedings of Australasian Universities Power Engineering Conference (AUPEC 2007), 9-12 Dec, 2007, Perth, Western Australia, pp. 687-692. ISBN 978-0-646-47499-1 (2007) [Refereed Conference Paper] [Detail]
Haruni, AMO and Muttaqi, KM and Negnevitsky, M, “Artificial intelligent approach to arc furnace response prediction”, Proceedings of InTech'07, 12-14 dec 2007, Sydney, Australia, pp. 1-5. ISBN 978-1-86365-718-1 (2007) [Refereed Conference Paper] [Detail]
Henderson, AD and Sargison, J and Walker, GJ and Haynes, J*, “A numerical study of the flow through a safety butterfly valve in a hydro-electric power scheme”, Proceedings of the 16th Australasian Fluid Mechanics Conference, 2-7 December 2007, Gold Coast, Australia, pp. 1116-1122. ISBN 978-1-864998-94-8 (2007) [Refereed Conference Paper] [Full Text] [Detail]
Henderson, AD and Walker, GJ, “Observation of transition phenomena on a controlled diffusion compressor stator with a circular arc leading edge”, Proceedings of the ASME Turbo Expo 2007: Power for Land, Sea and Air GT2007, 14-17 May, 2007, Montreal Canada, pp. 1-12. ISBN 0-7918-3796-3 (2007) [Refereed Conference Paper] [Detail]
Holloway, DS and Forbes, LK, “Boundary element computation of fresh water groundwater lenses”, Proceedings of the 7th Biennial Engineering Mathematics and Applications Conference, September 2005, Melbourne, Australia, pp. C446-C461. ISSN 1446-8735 (2006) [Refereed Conference Paper] [Detail]
Ji, H* and Jiang, D, “A dynamical system approach to semidefinite programming”, Proceedings of 2006 CACS Automatic Control Conference, 10-11 November, 2006, Taipei, Taiwan, ROC, pp. 1-6. (2006) [Refereed Conference Paper] [Detail]
Jiang, D, “complex-value recurrent neural networks for global optimization of beamforming in multi-symbol MIMO communication systems”, Proceedings of International Conference on Signal processing and Communication Systems, 17-19 dec. 2007, Gold Coast, Australia, pp. 1-8. ISBN 978-0-9756934-3-8 (2007) [Refereed Conference Paper] [Detail]
Johnson, PL and Negnevitsky, M and Muttaqi, KM, “Short term wind power forcasting using adaptive neuro-fuzzy inreference systems”, Proceedings of Australasian Universities Power Engineering Conference (AUPEC 2007), 9-12 Dec, 2007, Perth, Western Australia, pp. 652-657. ISBN 978-0-646-47499-1 (2007) [Refereed Conference Paper] [Full Text] [Detail]
Johnson, PL and Negnevitsky, M, “Wind farm power curve modeling using adaptive neuro-fuzzy inference systems”, Proceedings of the 8th international conference on intelligent technologies, 12-14 Dec 2007, Sydney, Australia, pp. 168-175. (2007) [Refereed Conference Paper] [Detail]
Lavroff, J and Davis, MR and Holloway, DS and Thomas, GA, “The whipping vibratory response of a hydroelastic segmented catamaran model”, Proceedings of FAST2007: Ninth International Conference on Fast Sea Transportation, 23-27 Sept, 2007, Shanghai China, pp. 600-607. (2007) [Refereed Conference Paper] [Detail]
Le, DTA and Kashem, M and Negnevitsky, M and Ledwich, G*, “Optimal distributed generation parameters for reducing losses with economic consideration”, Proceedings of 2007 IEEE Power Engineering Society General Meeting, 24-28 June, 2007, Tempa, Florida, USA, pp. 1-7. ISBN 1-4244-1298-6 (2007) [Refereed Conference Paper] [Detail]
Le, DTA and Muttaqi, KM and Negnevitsky, M and Ledwich, G*, “Response coordination of distributed generation and tap changers for voltage support”, Proceedings of Australasian Universities Power Engineering Conference (AUPEC 2007), 9-12 Dec, 2007, Perth, Western Australia, pp. 705-711. ISBN 978-0-646-47499-1 (2007) [Refereed Conference Paper] [Detail]
Letchford, CW, “A wind tunnel simulation study of wave effects on wind over the ocean”, Proceedings of ICWE12, Cairns Australia, Cairns Australia, pp. 735-742. (2007) [Non Refereed Conference Paper] [Detail]
Lim, D and Karri, V and Barrett, DT, “Intelligent approach to predicting emission performance in hydrogen power car”, Proceedings of international conference on modelling and simulation, 27-29 Aug, 2007, Coimbatore, India, pp. 1-6. (2007) [Non Refereed Conference Paper] [Detail]
Lim, MJ and Negnevitsky, M and Hartnett, JS, “Detecting abnormal changes in e-mail traffic using hierarchical fuzzy systems”, Proceedings of 2007 IEEE International Conference on Fuzzy Systems, 23-26 July 2007, London, UK, pp. 1309-1314. ISBN 1-4244-1210-2 (2007) [Refereed Conference Paper] [Detail]
Negnevitsky, M, “Computational intelligence applications to crisis management in power systems”, Proceedings of InTech'07, 12-14 dec 2007, Sydney, Australia, pp. 281-292. ISBN 978-1-86365-718-1 (2007) [Refereed Conference Paper] [Detail]
Negnevitsky, M and Johnson, PL and Santoso, S*, “Short term wind power forcasting using hybrid intelligent systems”, Proceedings of 2007 IEEE Power Engineering Society General Meeting, 24-28 June, 2007, Tempa, Florida, USA, pp. 1-4. ISBN 1-4244-1298-6 (2007) [Refereed Conference Paper] [Detail]
Patil, SG and Gale, TJ and Stack, CR, “Design of novel assessment techniques for opiod dependent patients”, Proceedings of 29th annual international conference of the IEEE engineering in medicine and biology society, 23-26 Aug 2007, Lyon, France, pp. 1-4. ISBN 1-4244-0788-5 (2007) [Refereed Conference Paper] [Detail]
Porter, JS and Sargison, J and Walker, GJ and Henderson, AD, “A comparative investigation of round and fan-shaped cooling hole near flow fields”, Proceedings of the ASME Turbo Expo 2007: Power for Land, Sea and Air GT2007, 14-17 May, 2007, Montreal Canada, pp. 1-10. ISBN 0-7918-3796-3 (2007) [Refereed Conference Paper] [Full Text] [Detail]
Porter, JS and Sargison, J and Henderson, AD, “Design and calibration of a facility for film cooling research”, Proceedings of 16th Australasian Fluid Mechanics Conference, 3-7 December, 2007, Gold Cost, Australia, pp. 87-93. ISBN 978-1-864998-94-8 (2007) [Refereed Conference Paper] [Full Text] [Detail]
Pullinger, MG and Sargison, J, “Using CFD to improve the design of circulating water channel”, Proceedings of the Sixteenth Australasian Fluid Mechanics Conference, 2-7 December 2007, Gold Coast, Australia, pp. 94-98. ISBN 978-1-864998-94-8 (2007) [Refereed Conference Paper] [Full Text] [Detail]
Thaijiam, C and Gale, TJ, “Investigation of Catheter Curvature and Genetic Algorithms in Conductance Catheter Optimization”, Proceedings of 29th annual international conference of the IEEE engineering in medicine and biology society, 23-26 Aug 2007, Lyon, France, pp. 2195-2198. ISBN 1-4244-0788-5 (2007) [Refereed Conference Paper] [Detail]
Yap, WK and Karri, V, “Control system for plug-in hybrid hydrogen fuel cell scooter”, Proceedings of international conference on modelling and simulation, 27-29 Aug, 2007, Coimbatore, India, pp. 1-6. (2007) [Non Refereed Conference Paper] [Detail]
Yap, WK and Karri, V, “Regenerative control systems for plug-in hydrogen fuel cell scooter”, Proceedings of 2007 international conference on engineering sustainability, 31 oct-2 nov, 2007, Wstern Australia, pp. 1-6. (2007) [Conference Extract] [Detail]

* This author is not affiliated with the University of Tasmania.